core_v1
AWSElasticBlockStoreVolumeSource
lightkube.models.core_v1.AWSElasticBlockStoreVolumeSource
(volumeID, fsType=None, partition=None, readOnly=None)Represents a Persistent Disk resource in AWS.
An AWS EBS disk must exist before mounting to a container. The disk must also be in the same AWS zone as the kubelet. An AWS EBS disk can only be mounted as read/write once. AWS EBS volumes support ownership management and SELinux relabeling.
parameters
- volumeID
str
- Unique ID of the persistent disk resource in AWS (Amazon EBS volume). More info - fsType
str
- (optional) Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - partition
int
- (optional) The partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). - readOnly
bool
- (optional) Specify "true" to force and set the ReadOnly property in VolumeMounts to "true". If omitted, the default is "false". More info
Affinity
lightkube.models.core_v1.Affinity
(nodeAffinity=None, podAffinity=None, podAntiAffinity=None)Affinity is a group of affinity scheduling rules.
parameters
- nodeAffinity
NodeAffinity
- (optional) Describes node affinity scheduling rules for the pod. - podAffinity
PodAffinity
- (optional) Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)). - podAntiAffinity
PodAntiAffinity
- (optional) Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).
AttachedVolume
lightkube.models.core_v1.AttachedVolume
(devicePath, name)AttachedVolume describes a volume attached to a node
parameters
- devicePath
str
- DevicePath represents the device path where the volume should be available - name
str
- Name of the attached volume
AzureDiskVolumeSource
lightkube.models.core_v1.AzureDiskVolumeSource
(diskName, diskURI, cachingMode=None, fsType=None, kind=None, readOnly=None)AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.
parameters
- diskName
str
- The Name of the data disk in the blob storage - diskURI
str
- The URI the data disk in the blob storage - cachingMode
str
- (optional) Host Caching mode: None, Read Only, Read Write. - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - kind
str
- (optional) Expected values Shared: multiple blob disks per storage account Dedicated: single blob disk per storage account Managed: azure managed data disk (only in managed availability set). defaults to shared - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
AzureFilePersistentVolumeSource
lightkube.models.core_v1.AzureFilePersistentVolumeSource
(secretName, shareName, readOnly=None, secretNamespace=None)AzureFile represents an Azure File Service mount on the host and bind mount to the pod.
parameters
- secretName
str
- the name of secret that contains Azure Storage Account Name and Key - shareName
str
- Share Name - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - secretNamespace
str
- (optional) the namespace of the secret that contains Azure Storage Account Name and Key default is the same as the Pod
AzureFileVolumeSource
lightkube.models.core_v1.AzureFileVolumeSource
(secretName, shareName, readOnly=None)AzureFile represents an Azure File Service mount on the host and bind mount to the pod.
parameters
- secretName
str
- the name of secret that contains Azure Storage Account Name and Key - shareName
str
- Share Name - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
Binding
lightkube.models.core_v1.Binding
(target, apiVersion=None, kind=None, metadata=None)Binding ties one object to another; for example, a pod is bound to a node by a scheduler. Deprecated in 1.7, please use the bindings subresource of pods instead.
parameters
- target
ObjectReference
- The target object that you want to bind to the standard object. - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info
CSIPersistentVolumeSource
lightkube.models.core_v1.CSIPersistentVolumeSource
(driver, volumeHandle, controllerExpandSecretRef=None, controllerPublishSecretRef=None, fsType=None, nodePublishSecretRef=None, nodeStageSecretRef=None, readOnly=None, volumeAttributes=None)Represents storage that is managed by an external CSI volume driver (Beta feature)
parameters
- driver
str
- Driver is the name of the driver to use for this volume. Required. - volumeHandle
str
- VolumeHandle is the unique volume name returned by the CSI volume plugin’s CreateVolume to refer to the volume on all subsequent calls. Required. - controllerExpandSecretRef
SecretReference
- (optional) ControllerExpandSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI ControllerExpandVolume call. This is an alpha field and requires enabling ExpandCSIVolumes feature gate. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed. - controllerPublishSecretRef
SecretReference
- (optional) ControllerPublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI ControllerPublishVolume and ControllerUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed. - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". - nodePublishSecretRef
SecretReference
- (optional) NodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed. - nodeStageSecretRef
SecretReference
- (optional) NodeStageSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodeStageVolume and NodeStageVolume and NodeUnstageVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed. - readOnly
bool
- (optional) Optional: The value to pass to ControllerPublishVolumeRequest. Defaults to false (read/write). - volumeAttributes
dict
- (optional) Attributes of the volume to publish.
CSIVolumeSource
lightkube.models.core_v1.CSIVolumeSource
(driver, fsType=None, nodePublishSecretRef=None, readOnly=None, volumeAttributes=None)Represents a source location of a volume to mount, managed by an external CSI driver
parameters
- driver
str
- Driver is the name of the CSI driver that handles this volume. Consult with your admin for the correct name as registered in the cluster. - fsType
str
- (optional) Filesystem type to mount. Ex. "ext4", "xfs", "ntfs". If not provided, the empty value is passed to the associated CSI driver which will determine the default filesystem to apply. - nodePublishSecretRef
LocalObjectReference
- (optional) NodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secret references are passed. - readOnly
bool
- (optional) Specifies a read-only configuration for the volume. Defaults to false (read/write). - volumeAttributes
dict
- (optional) VolumeAttributes stores driver-specific properties that are passed to the CSI driver. Consult your driver's documentation for supported values.
Capabilities
lightkube.models.core_v1.Capabilities
(add=None, drop=None)Adds and removes POSIX capabilities from running containers.
parameters
- add
List[str]
- (optional) Added capabilities - drop
List[str]
- (optional) Removed capabilities
CephFSPersistentVolumeSource
lightkube.models.core_v1.CephFSPersistentVolumeSource
(monitors, path=None, readOnly=None, secretFile=None, secretRef=None, user=None)Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.
parameters
- monitors
List[str]
- Required: Monitors is a collection of Ceph monitors More info - path
str
- (optional) Optional: Used as the mounted root, rather than the full Ceph tree, default is / - readOnly
bool
- (optional) Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info - secretFile
str
- (optional) Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info - secretRef
SecretReference
- (optional) Optional: SecretRef is reference to the authentication secret for User, default is empty. More info - user
str
- (optional) Optional: User is the rados user name, default is admin More info
CephFSVolumeSource
lightkube.models.core_v1.CephFSVolumeSource
(monitors, path=None, readOnly=None, secretFile=None, secretRef=None, user=None)Represents a Ceph Filesystem mount that lasts the lifetime of a pod Cephfs volumes do not support ownership management or SELinux relabeling.
parameters
- monitors
List[str]
- Required: Monitors is a collection of Ceph monitors More info - path
str
- (optional) Optional: Used as the mounted root, rather than the full Ceph tree, default is / - readOnly
bool
- (optional) Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info - secretFile
str
- (optional) Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info - secretRef
LocalObjectReference
- (optional) Optional: SecretRef is reference to the authentication secret for User, default is empty. More info - user
str
- (optional) Optional: User is the rados user name, default is admin More info
CinderPersistentVolumeSource
lightkube.models.core_v1.CinderPersistentVolumeSource
(volumeID, fsType=None, readOnly=None, secretRef=None)Represents a cinder volume resource in Openstack. A Cinder volume must exist before mounting to a container. The volume must also be in the same region as the kubelet. Cinder volumes support ownership management and SELinux relabeling.
parameters
- volumeID
str
- volume id used to identify the volume in cinder. More info - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - readOnly
bool
- (optional) Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info - secretRef
SecretReference
- (optional) Optional: points to a secret object containing parameters used to connect to OpenStack.
CinderVolumeSource
lightkube.models.core_v1.CinderVolumeSource
(volumeID, fsType=None, readOnly=None, secretRef=None)Represents a cinder volume resource in Openstack. A Cinder volume must exist before mounting to a container. The volume must also be in the same region as the kubelet. Cinder volumes support ownership management and SELinux relabeling.
parameters
- volumeID
str
- volume id used to identify the volume in cinder. More info - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - readOnly
bool
- (optional) Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info - secretRef
LocalObjectReference
- (optional) Optional: points to a secret object containing parameters used to connect to OpenStack.
ClientIPConfig
lightkube.models.core_v1.ClientIPConfig
(timeoutSeconds=None)ClientIPConfig represents the configurations of Client IP based session affinity.
parameters
- timeoutSeconds
int
- (optional) timeoutSeconds specifies the seconds of ClientIP type session sticky time. The value must be >0 && <=86400(for 1 day) if ServiceAffinity == "ClientIP". Default value is 10800(for 3 hours).
ComponentCondition
lightkube.models.core_v1.ComponentCondition
(status, type, error=None, message=None)Information about the condition of a component.
parameters
- status
str
- Status of the condition for a component. Valid values for "Healthy": "True", "False", or "Unknown". - type
str
- Type of condition for a component. Valid value: "Healthy" - error
str
- (optional) Condition error code for a component. For example, a health check error code. - message
str
- (optional) Message about the condition for a component. For example, information about a health check.
ComponentStatus
lightkube.models.core_v1.ComponentStatus
(apiVersion=None, conditions=None, kind=None, metadata=None)ComponentStatus (and ComponentStatusList) holds the cluster validation info. Deprecated: This API is deprecated in v1.19+
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - conditions
ComponentCondition
- (optional) List of component conditions observed - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info
ComponentStatusList
lightkube.models.core_v1.ComponentStatusList
(items, apiVersion=None, kind=None, metadata=None)Status of all the conditions for the component as a list of ComponentStatus objects. Deprecated: This API is deprecated in v1.19+
parameters
- items
ComponentStatus
- List of ComponentStatus objects. - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
ConfigMap
lightkube.models.core_v1.ConfigMap
(apiVersion=None, binaryData=None, data=None, immutable=None, kind=None, metadata=None)ConfigMap holds configuration data for pods to consume.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - binaryData
dict
- (optional) BinaryData contains the binary data. Each key must consist of alphanumeric characters, '-', '' or '.'. BinaryData can contain byte sequences that are not in the UTF-8 range. The keys stored in BinaryData must not overlap with the ones in the Data field, this is enforced during validation process. Using this field will require 1.10+ apiserver and kubelet. - data
dict
- (optional) Data contains the configuration data. Each key must consist of alphanumeric characters, '-', '' or '.'. Values with non-UTF-8 byte sequences must use the BinaryData field. The keys stored in Data must not overlap with the keys in the BinaryData field, this is enforced during validation process. - immutable
bool
- (optional) Immutable, if set to true, ensures that data stored in the ConfigMap cannot be updated (only object metadata can be modified). If not set to true, the field can be modified at any time. Defaulted to nil. - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info
ConfigMapEnvSource
lightkube.models.core_v1.ConfigMapEnvSource
(name=None, optional=None)ConfigMapEnvSource selects a ConfigMap to populate the environment variables with.
The contents of the target ConfigMap's Data field will represent the key-value pairs as environment variables.
parameters
- name
str
- (optional) Name of the referent. More info - optional
bool
- (optional) Specify whether the ConfigMap must be defined
ConfigMapKeySelector
lightkube.models.core_v1.ConfigMapKeySelector
(key, name=None, optional=None)Selects a key from a ConfigMap.
parameters
- key
str
- The key to select. - name
str
- (optional) Name of the referent. More info - optional
bool
- (optional) Specify whether the ConfigMap or its key must be defined
ConfigMapList
lightkube.models.core_v1.ConfigMapList
(items, apiVersion=None, kind=None, metadata=None)ConfigMapList is a resource containing a list of ConfigMap objects.
parameters
- items
ConfigMap
- Items is the list of ConfigMaps. - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) More info
ConfigMapNodeConfigSource
lightkube.models.core_v1.ConfigMapNodeConfigSource
(kubeletConfigKey, name, namespace, resourceVersion=None, uid=None)ConfigMapNodeConfigSource contains the information to reference a ConfigMap as a config source for the Node. This API is deprecated since 1.22: https://git.k8s.io/enhancements/keps/sig-node/281-dynamic-kubelet-configuration
parameters
- kubeletConfigKey
str
- KubeletConfigKey declares which key of the referenced ConfigMap corresponds to the KubeletConfiguration structure This field is required in all cases. - name
str
- Name is the metadata.name of the referenced ConfigMap. This field is required in all cases. - namespace
str
- Namespace is the metadata.namespace of the referenced ConfigMap. This field is required in all cases. - resourceVersion
str
- (optional) ResourceVersion is the metadata.ResourceVersion of the referenced ConfigMap. This field is forbidden in Node.Spec, and required in Node.Status. - uid
str
- (optional) UID is the metadata.UID of the referenced ConfigMap. This field is forbidden in Node.Spec, and required in Node.Status.
ConfigMapProjection
lightkube.models.core_v1.ConfigMapProjection
(items=None, name=None, optional=None)Adapts a ConfigMap into a projected volume.
The contents of the target ConfigMap's Data field will be presented in a projected volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. Note that this is identical to a configmap volume source without the default mode.
parameters
- items
KeyToPath
- (optional) If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. - name
str
- (optional) Name of the referent. More info - optional
bool
- (optional) Specify whether the ConfigMap or its keys must be defined
ConfigMapVolumeSource
lightkube.models.core_v1.ConfigMapVolumeSource
(defaultMode=None, items=None, name=None, optional=None)Adapts a ConfigMap into a volume.
The contents of the target ConfigMap's Data field will be presented in a volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. ConfigMap volumes support ownership management and SELinux relabeling.
parameters
- defaultMode
int
- (optional) Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. - items
KeyToPath
- (optional) If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. - name
str
- (optional) Name of the referent. More info - optional
bool
- (optional) Specify whether the ConfigMap or its keys must be defined
Container
lightkube.models.core_v1.Container
(name, args=None, command=None, env=None, envFrom=None, image=None, imagePullPolicy=None, lifecycle=None, livenessProbe=None, ports=None, readinessProbe=None, resources=None, securityContext=None, startupProbe=None, stdin=None, stdinOnce=None, terminationMessagePath=None, terminationMessagePolicy=None, tty=None, volumeDevices=None, volumeMounts=None, workingDir=None)A single application container that you want to run within a pod.
parameters
- name
str
- Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated. - args
List[str]
- (optional) Arguments to the entrypoint. The docker image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info - command
List[str]
- (optional) Entrypoint array. Not executed within a shell. The docker image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info - env
EnvVar
- (optional) List of environment variables to set in the container. Cannot be updated. - envFrom
EnvFromSource
- (optional) List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated. - image
str
- (optional) Docker image name. More info This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets. - imagePullPolicy
str
- (optional) Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info - lifecycle
Lifecycle
- (optional) Actions that the management system should take in response to container lifecycle events. Cannot be updated. - livenessProbe
Probe
- (optional) Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info - ports
ContainerPort
- (optional) List of ports to expose from the container. Exposing a port here gives the system additional information about the network connections a container uses, but is primarily informational. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Cannot be updated. - readinessProbe
Probe
- (optional) Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info - resources
ResourceRequirements
- (optional) Compute Resources required by this container. Cannot be updated. More info - securityContext
SecurityContext
- (optional) SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. More info - startupProbe
Probe
- (optional) StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info - stdin
bool
- (optional) Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false. - stdinOnce
bool
- (optional) Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false - terminationMessagePath
str
- (optional) Optional: Path at which the file to which the container's termination message will be written is mounted into the container's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated. - terminationMessagePolicy
str
- (optional) Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated. - tty
bool
- (optional) Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false. - volumeDevices
VolumeDevice
- (optional) volumeDevices is the list of block devices to be used by the container. - volumeMounts
VolumeMount
- (optional) Pod volumes to mount into the container's filesystem. Cannot be updated. - workingDir
str
- (optional) Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
ContainerImage
lightkube.models.core_v1.ContainerImage
(names=None, sizeBytes=None)Describe a container image
parameters
- names
List[str]
- (optional) Names by which this image is known. e.g. ["k8s.gcr.io/hyperkube:v1.0.7", "dockerhub.io/google_containers/hyperkube:v1.0.7"] - sizeBytes
int
- (optional) The size of the image in bytes.
ContainerPort
lightkube.models.core_v1.ContainerPort
(containerPort, hostIP=None, hostPort=None, name=None, protocol=None)ContainerPort represents a network port in a single container.
parameters
- containerPort
int
- Number of port to expose on the pod's IP address. This must be a valid port number, 0 < x < 65536. - hostIP
str
- (optional) What host IP to bind the external port to. - hostPort
int
- (optional) Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this. - name
str
- (optional) If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services. - protocol
str
- (optional) Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".
ContainerState
lightkube.models.core_v1.ContainerState
(running=None, terminated=None, waiting=None)ContainerState holds a possible state of container. Only one of its members may be specified. If none of them is specified, the default one is ContainerStateWaiting.
parameters
- running
ContainerStateRunning
- (optional) Details about a running container - terminated
ContainerStateTerminated
- (optional) Details about a terminated container - waiting
ContainerStateWaiting
- (optional) Details about a waiting container
ContainerStateRunning
lightkube.models.core_v1.ContainerStateRunning
(startedAt=None)ContainerStateRunning is a running state of a container.
parameters
- startedAt
meta_v1.Time
- (optional) Time at which the container was last (re-)started
ContainerStateTerminated
lightkube.models.core_v1.ContainerStateTerminated
(exitCode, containerID=None, finishedAt=None, message=None, reason=None, signal=None, startedAt=None)ContainerStateTerminated is a terminated state of a container.
parameters
- exitCode
int
- Exit status from the last termination of the container - containerID
str
- (optional) Container's ID in the format 'docker://' - finishedAt
meta_v1.Time
- (optional) Time at which the container last terminated - message
str
- (optional) Message regarding the last termination of the container - reason
str
- (optional) (brief) reason from the last termination of the container - signal
int
- (optional) Signal from the last termination of the container - startedAt
meta_v1.Time
- (optional) Time at which previous execution of the container started
ContainerStateWaiting
lightkube.models.core_v1.ContainerStateWaiting
(message=None, reason=None)ContainerStateWaiting is a waiting state of a container.
parameters
- message
str
- (optional) Message regarding why the container is not yet running. - reason
str
- (optional) (brief) reason the container is not yet running.
ContainerStatus
lightkube.models.core_v1.ContainerStatus
(image, imageID, name, ready, restartCount, containerID=None, lastState=None, started=None, state=None)ContainerStatus contains details for the current status of this container.
parameters
- image
str
- The image the container is running. More info - imageID
str
- ImageID of the container's image. - name
str
- This must be a DNS_LABEL. Each container in a pod must have a unique name. Cannot be updated. - ready
bool
- Specifies whether the container has passed its readiness probe. - restartCount
int
- The number of times the container has been restarted. - containerID
str
- (optional) Container's ID in the format 'docker://'. - lastState
ContainerState
- (optional) Details about the container's last termination condition. - started
bool
- (optional) Specifies whether the container has passed its startup probe. Initialized as false, becomes true after startupProbe is considered successful. Resets to false when the container is restarted, or if kubelet loses state temporarily. Is always true when no startupProbe is defined. - state
ContainerState
- (optional) Details about the container's current condition.
DaemonEndpoint
lightkube.models.core_v1.DaemonEndpoint
(Port)DaemonEndpoint contains information about a single Daemon endpoint.
parameters
- Port
int
- Port number of the given endpoint.
DownwardAPIProjection
lightkube.models.core_v1.DownwardAPIProjection
(items=None)Represents downward API info for projecting into a projected volume. Note that this is identical to a downwardAPI volume source without the default mode.
parameters
- items
DownwardAPIVolumeFile
- (optional) Items is a list of DownwardAPIVolume file
DownwardAPIVolumeFile
lightkube.models.core_v1.DownwardAPIVolumeFile
(path, fieldRef=None, mode=None, resourceFieldRef=None)DownwardAPIVolumeFile represents information to create the file containing the pod field
parameters
- path
str
- Required: Path is the relative path name of the file to be created. Must not be absolute or contain the '..' path. Must be utf-8 encoded. The first item of the relative path must not start with '..' - fieldRef
ObjectFieldSelector
- (optional) Required: Selects a field of the pod: only annotations, labels, name and namespace are supported. - mode
int
- (optional) Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. - resourceFieldRef
ResourceFieldSelector
- (optional) Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.
DownwardAPIVolumeSource
lightkube.models.core_v1.DownwardAPIVolumeSource
(defaultMode=None, items=None)DownwardAPIVolumeSource represents a volume containing downward API info. Downward API volumes support ownership management and SELinux relabeling.
parameters
- defaultMode
int
- (optional) Optional: mode bits to use on created files by default. Must be a Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. - items
DownwardAPIVolumeFile
- (optional) Items is a list of downward API volume file
EmptyDirVolumeSource
lightkube.models.core_v1.EmptyDirVolumeSource
(medium=None, sizeLimit=None)Represents an empty directory for a pod. Empty directory volumes support ownership management and SELinux relabeling.
parameters
- medium
str
- (optional) What type of storage medium should back this directory. The default is "" which means to use the node's default medium. Must be an empty string (default) or Memory. More info - sizeLimit
resource.Quantity
- (optional) Total amount of local storage required for this EmptyDir volume. The size limit is also applicable for memory medium. The maximum usage on memory medium EmptyDir would be the minimum value between the SizeLimit specified here and the sum of memory limits of all containers in a pod. The default is nil which means that the limit is undefined. More info
EndpointAddress
lightkube.models.core_v1.EndpointAddress
(ip, hostname=None, nodeName=None, targetRef=None)EndpointAddress is a tuple that describes single IP address.
parameters
- ip
str
- The IP of this endpoint. May not be loopback (127.0.0.0/8), link-local (169.254.0.0/16), or link-local multicast ((224.0.0.0/24). IPv6 is also accepted but not fully supported on all platforms. Also, certain kubernetes components, like kube-proxy, are not IPv6 ready. - hostname
str
- (optional) The Hostname of this endpoint - nodeName
str
- (optional) Optional: Node hosting this endpoint. This can be used to determine endpoints local to a node. - targetRef
ObjectReference
- (optional) Reference to object providing the endpoint.
EndpointPort
lightkube.models.core_v1.EndpointPort
(port, appProtocol=None, name=None, protocol=None)EndpointPort is a tuple that describes a single port.
parameters
- port
int
- The port number of the endpoint. - appProtocol
str
- (optional) The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. - name
str
- (optional) The name of this port. This must match the 'name' field in the corresponding ServicePort. Must be a DNS_LABEL. Optional only if one port is defined. - protocol
str
- (optional) The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
EndpointSubset
lightkube.models.core_v1.EndpointSubset
(addresses=None, notReadyAddresses=None, ports=None)EndpointSubset is a group of addresses with a common set of ports. The expanded set of endpoints is the Cartesian product of Addresses x Ports. For example, given: { Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}], Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}] } The resulting set of endpoints can be viewed as: a: [ 10.10.1.1:8675, 10.10.2.2:8675 ], b: [ 10.10.1.1:309, 10.10.2.2:309 ]
parameters
- addresses
EndpointAddress
- (optional) IP addresses which offer the related ports that are marked as ready. These endpoints should be considered safe for load balancers and clients to utilize. - notReadyAddresses
EndpointAddress
- (optional) IP addresses which offer the related ports but are not currently marked as ready because they have not yet finished starting, have recently failed a readiness check, or have recently failed a liveness check. - ports
EndpointPort
- (optional) Port numbers available on the related IP addresses.
Endpoints
lightkube.models.core_v1.Endpoints
(apiVersion=None, kind=None, metadata=None, subsets=None)Endpoints is a collection of endpoints that implement the actual service. Example: Name: "mysvc", Subsets: [ { Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}], Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}] }, { Addresses: [{"ip": "10.10.3.3"}], Ports: [{"name": "a", "port": 93}, {"name": "b", "port": 76}] }, ]
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - subsets
EndpointSubset
- (optional) The set of all endpoints is the union of all subsets. Addresses are placed into subsets according to the IPs they share. A single address with multiple ports, some of which are ready and some of which are not (because they come from different containers) will result in the address being displayed in different subsets for the different ports. No address will appear in both Addresses and NotReadyAddresses in the same subset. Sets of addresses and ports that comprise a service.
EndpointsList
lightkube.models.core_v1.EndpointsList
(items, apiVersion=None, kind=None, metadata=None)EndpointsList is a list of endpoints.
parameters
- items
Endpoints
- List of endpoints. - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
EnvFromSource
lightkube.models.core_v1.EnvFromSource
(configMapRef=None, prefix=None, secretRef=None)EnvFromSource represents the source of a set of ConfigMaps
parameters
- configMapRef
ConfigMapEnvSource
- (optional) The ConfigMap to select from - prefix
str
- (optional) An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER. - secretRef
SecretEnvSource
- (optional) The Secret to select from
EnvVar
lightkube.models.core_v1.EnvVar
(name, value=None, valueFrom=None)EnvVar represents an environment variable present in a Container.
parameters
- name
str
- Name of the environment variable. Must be a C_IDENTIFIER. - value
str
- (optional) Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "". - valueFrom
EnvVarSource
- (optional) Source for the environment variable's value. Cannot be used if value is not empty.
EnvVarSource
lightkube.models.core_v1.EnvVarSource
(configMapKeyRef=None, fieldRef=None, resourceFieldRef=None, secretKeyRef=None)EnvVarSource represents a source for the value of an EnvVar.
parameters
- configMapKeyRef
ConfigMapKeySelector
- (optional) Selects a key of a ConfigMap. - fieldRef
ObjectFieldSelector
- (optional) Selects a field of the pod: supports metadata.name, metadata.namespace,metadata.labels['<KEY>']
,metadata.annotations['<KEY>']
, spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. - resourceFieldRef
ResourceFieldSelector
- (optional) Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. - secretKeyRef
SecretKeySelector
- (optional) Selects a key of a secret in the pod's namespace
EphemeralContainer
lightkube.models.core_v1.EphemeralContainer
(name, args=None, command=None, env=None, envFrom=None, image=None, imagePullPolicy=None, lifecycle=None, livenessProbe=None, ports=None, readinessProbe=None, resources=None, securityContext=None, startupProbe=None, stdin=None, stdinOnce=None, targetContainerName=None, terminationMessagePath=None, terminationMessagePolicy=None, tty=None, volumeDevices=None, volumeMounts=None, workingDir=None)An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation.
To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.
This is a beta feature available on clusters that haven't disabled the EphemeralContainers feature gate.
parameters
- name
str
- Name of the ephemeral container specified as a DNS_LABEL. This name must be unique among all containers, init containers and ephemeral containers. - args
List[str]
- (optional) Arguments to the entrypoint. The docker image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info - command
List[str]
- (optional) Entrypoint array. Not executed within a shell. The docker image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info - env
EnvVar
- (optional) List of environment variables to set in the container. Cannot be updated. - envFrom
EnvFromSource
- (optional) List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated. - image
str
- (optional) Docker image name. More info - imagePullPolicy
str
- (optional) Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info - lifecycle
Lifecycle
- (optional) Lifecycle is not allowed for ephemeral containers. - livenessProbe
Probe
- (optional) Probes are not allowed for ephemeral containers. - ports
ContainerPort
- (optional) Ports are not allowed for ephemeral containers. - readinessProbe
Probe
- (optional) Probes are not allowed for ephemeral containers. - resources
ResourceRequirements
- (optional) Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources already allocated to the pod. - securityContext
SecurityContext
- (optional) Optional: SecurityContext defines the security options the ephemeral container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. - startupProbe
Probe
- (optional) Probes are not allowed for ephemeral containers. - stdin
bool
- (optional) Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false. - stdinOnce
bool
- (optional) Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is false - targetContainerName
str
- (optional) If set, the name of the container from PodSpec that this ephemeral container targets. The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. If not set then the ephemeral container uses the namespaces configured in the Pod spec. The container runtime must implement support for this feature. If the runtime does not support namespace targeting then the result of setting this field is undefined. - terminationMessagePath
str
- (optional) Optional: Path at which the file to which the container's termination message will be written is mounted into the container's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated. - terminationMessagePolicy
str
- (optional) Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated. - tty
bool
- (optional) Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false. - volumeDevices
VolumeDevice
- (optional) volumeDevices is the list of block devices to be used by the container. - volumeMounts
VolumeMount
- (optional) Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers. Cannot be updated. - workingDir
str
- (optional) Container's working directory. If not specified, the container runtime's default will be used, which might be configured in the container image. Cannot be updated.
EphemeralVolumeSource
lightkube.models.core_v1.EphemeralVolumeSource
(volumeClaimTemplate=None)Represents an ephemeral volume that is handled by a normal storage driver.
parameters
- volumeClaimTemplate
PersistentVolumeClaimTemplate
- (optional) Will be used to create a stand-alone PVC to provision the volume. The pod in which this EphemeralVolumeSource is embedded will be the owner of the PVC, i.e. the PVC will be deleted together with the pod. The name of the PVC will be<pod name>-<volume name>
where<volume name>
is the name from thePodSpec.Volumes
array entry. Pod validation will reject the pod if the concatenated name is not valid for a PVC (for example, too long). An existing PVC with that name that is not owned by the pod will not be used for the pod to avoid using an unrelated volume by mistake. Starting the pod is then blocked until the unrelated PVC is removed. If such a pre-created PVC is meant to be used by the pod, the PVC has to updated with an owner reference to the pod once the pod exists. Normally this should not be necessary, but it may be useful when manually reconstructing a broken cluster. This field is read-only and no changes will be made by Kubernetes to the PVC after it has been created. Required, must not be nil.
Event
lightkube.models.core_v1.Event
(involvedObject, metadata, action=None, apiVersion=None, count=None, eventTime=None, firstTimestamp=None, kind=None, lastTimestamp=None, message=None, reason=None, related=None, reportingComponent=None, reportingInstance=None, series=None, source=None, type=None)Event is a report of an event somewhere in the cluster. Events have a limited retention time and triggers and messages may evolve with time. Event consumers should not rely on the timing of an event with a given Reason reflecting a consistent underlying trigger, or the continued existence of events with that Reason. Events should be treated as informative, best-effort, supplemental data.
parameters
- involvedObject
ObjectReference
- The object that this event is about. - metadata
meta_v1.ObjectMeta
- Standard object's metadata. More info - action
str
- (optional) What action was taken/failed regarding to the Regarding object. - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - count
int
- (optional) The number of times this event has occurred. - eventTime
meta_v1.MicroTime
- (optional) Time when this Event was first observed. - firstTimestamp
meta_v1.Time
- (optional) The time at which the event was first recorded. (Time of server receipt is in TypeMeta.) - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - lastTimestamp
meta_v1.Time
- (optional) The time at which the most recent occurrence of this event was recorded. - message
str
- (optional) A human-readable description of the status of this operation. - reason
str
- (optional) This should be a short, machine understandable string that gives the reason for the transition into the object's current status. - related
ObjectReference
- (optional) Optional secondary object for more complex actions. - reportingComponent
str
- (optional) Name of the controller that emitted this Event, e.g.kubernetes.io/kubelet
. - reportingInstance
str
- (optional) ID of the controller instance, e.g.kubelet-xyzf
. - series
EventSeries
- (optional) Data about the Event series this event represents or nil if it's a singleton Event. - source
EventSource
- (optional) The component reporting this event. Should be a short machine understandable string. - type
str
- (optional) Type of this event (Normal, Warning), new types could be added in the future
EventList
lightkube.models.core_v1.EventList
(items, apiVersion=None, kind=None, metadata=None)EventList is a list of events.
parameters
- items
Event
- List of events - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
EventSeries
lightkube.models.core_v1.EventSeries
(count=None, lastObservedTime=None)EventSeries contain information on series of events, i.e. thing that was/is happening continuously for some time.
parameters
- count
int
- (optional) Number of occurrences in this series up to the last heartbeat time - lastObservedTime
meta_v1.MicroTime
- (optional) Time of the last occurrence observed
EventSource
lightkube.models.core_v1.EventSource
(component=None, host=None)EventSource contains information for an event.
parameters
- component
str
- (optional) Component from which the event is generated. - host
str
- (optional) Node name on which the event is generated.
ExecAction
lightkube.models.core_v1.ExecAction
(command=None)ExecAction describes a "run in container" action.
parameters
- command
List[str]
- (optional) Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.
FCVolumeSource
lightkube.models.core_v1.FCVolumeSource
(fsType=None, lun=None, readOnly=None, targetWWNs=None, wwids=None)Represents a Fibre Channel volume. Fibre Channel volumes can only be mounted as read/write once. Fibre Channel volumes support ownership management and SELinux relabeling.
parameters
- fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - lun
int
- (optional) Optional: FC target lun number - readOnly
bool
- (optional) Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - targetWWNs
List[str]
- (optional) Optional: FC target worldwide names (WWNs) - wwids
List[str]
- (optional) Optional: FC volume world wide identifiers (wwids) Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously.
FlexPersistentVolumeSource
lightkube.models.core_v1.FlexPersistentVolumeSource
(driver, fsType=None, options=None, readOnly=None, secretRef=None)FlexPersistentVolumeSource represents a generic persistent volume resource that is provisioned/attached using an exec based plugin.
parameters
- driver
str
- Driver is the name of the driver to use for this volume. - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script. - options
dict
- (optional) Optional: Extra command options if any. - readOnly
bool
- (optional) Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - secretRef
SecretReference
- (optional) Optional: SecretRef is reference to the secret object containing sensitive information to pass to the plugin scripts. This may be empty if no secret object is specified. If the secret object contains more than one secret, all secrets are passed to the plugin scripts.
FlexVolumeSource
lightkube.models.core_v1.FlexVolumeSource
(driver, fsType=None, options=None, readOnly=None, secretRef=None)FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.
parameters
- driver
str
- Driver is the name of the driver to use for this volume. - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script. - options
dict
- (optional) Optional: Extra command options if any. - readOnly
bool
- (optional) Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - secretRef
LocalObjectReference
- (optional) Optional: SecretRef is reference to the secret object containing sensitive information to pass to the plugin scripts. This may be empty if no secret object is specified. If the secret object contains more than one secret, all secrets are passed to the plugin scripts.
FlockerVolumeSource
lightkube.models.core_v1.FlockerVolumeSource
(datasetName=None, datasetUUID=None)Represents a Flocker volume mounted by the Flocker agent. One and only one of datasetName and datasetUUID should be set. Flocker volumes do not support ownership management or SELinux relabeling.
parameters
- datasetName
str
- (optional) Name of the dataset stored as metadata -> name on the dataset for Flocker should be considered as deprecated - datasetUUID
str
- (optional) UUID of the dataset. This is unique identifier of a Flocker dataset
GCEPersistentDiskVolumeSource
lightkube.models.core_v1.GCEPersistentDiskVolumeSource
(pdName, fsType=None, partition=None, readOnly=None)Represents a Persistent Disk resource in Google Compute Engine.
A GCE PD must exist before mounting to a container. The disk must also be in the same GCE project and zone as the kubelet. A GCE PD can only be mounted as read/write once or read-only many times. GCE PDs support ownership management and SELinux relabeling.
parameters
- pdName
str
- Unique name of the PD resource in GCE. Used to identify the disk in GCE. More info - fsType
str
- (optional) Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - partition
int
- (optional) The partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). More info - readOnly
bool
- (optional) ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info
GRPCAction
lightkube.models.core_v1.GRPCAction
(port, service=None)parameters
- port
int
- Port number of the gRPC service. Number must be in the range 1 to 65535. - service
str
- (optional) Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). If this is not specified, the default behavior is defined by gRPC.
GitRepoVolumeSource
lightkube.models.core_v1.GitRepoVolumeSource
(repository, directory=None, revision=None)Represents a volume that is populated with the contents of a git repository. Git repo volumes do not support ownership management. Git repo volumes support SELinux relabeling.
DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod's container.
parameters
- repository
str
- Repository URL - directory
str
- (optional) Target directory name. Must not contain or start with '..'. If '.' is supplied, the volume directory will be the git repository. Otherwise, if specified, the volume will contain the git repository in the subdirectory with the given name. - revision
str
- (optional) Commit hash for the specified revision.
GlusterfsPersistentVolumeSource
lightkube.models.core_v1.GlusterfsPersistentVolumeSource
(endpoints, path, endpointsNamespace=None, readOnly=None)Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.
parameters
- endpoints
str
- EndpointsName is the endpoint name that details Glusterfs topology. More info - path
str
- Path is the Glusterfs volume path. More info - endpointsNamespace
str
- (optional) EndpointsNamespace is the namespace that contains Glusterfs endpoint. If this field is empty, the EndpointNamespace defaults to the same namespace as the bound PVC. More info - readOnly
bool
- (optional) ReadOnly here will force the Glusterfs volume to be mounted with read-only permissions. Defaults to false. More info
GlusterfsVolumeSource
lightkube.models.core_v1.GlusterfsVolumeSource
(endpoints, path, readOnly=None)Represents a Glusterfs mount that lasts the lifetime of a pod. Glusterfs volumes do not support ownership management or SELinux relabeling.
parameters
HTTPGetAction
lightkube.models.core_v1.HTTPGetAction
(port, host=None, httpHeaders=None, path=None, scheme=None)HTTPGetAction describes an action based on HTTP Get requests.
parameters
- port
util_intstr.IntOrString
- Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. - host
str
- (optional) Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead. - httpHeaders
HTTPHeader
- (optional) Custom headers to set in the request. HTTP allows repeated headers. - path
str
- (optional) Path to access on the HTTP server. - scheme
str
- (optional) Scheme to use for connecting to the host. Defaults to HTTP.
HTTPHeader
lightkube.models.core_v1.HTTPHeader
(name, value)HTTPHeader describes a custom header to be used in HTTP probes
parameters
- name
str
- The header field name - value
str
- The header field value
HostAlias
lightkube.models.core_v1.HostAlias
(hostnames=None, ip=None)HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod's hosts file.
parameters
- hostnames
List[str]
- (optional) Hostnames for the above IP address. - ip
str
- (optional) IP address of the host file entry.
HostPathVolumeSource
lightkube.models.core_v1.HostPathVolumeSource
(path, type=None)Represents a host path mapped into a pod. Host path volumes do not support ownership management or SELinux relabeling.
parameters
ISCSIPersistentVolumeSource
lightkube.models.core_v1.ISCSIPersistentVolumeSource
(iqn, lun, targetPortal, chapAuthDiscovery=None, chapAuthSession=None, fsType=None, initiatorName=None, iscsiInterface=None, portals=None, readOnly=None, secretRef=None)ISCSIPersistentVolumeSource represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.
parameters
- iqn
str
- Target iSCSI Qualified Name. - lun
int
- iSCSI Target Lun number. - targetPortal
str
- iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260). - chapAuthDiscovery
bool
- (optional) whether support iSCSI Discovery CHAP authentication - chapAuthSession
bool
- (optional) whether support iSCSI Session CHAP authentication - fsType
str
- (optional) Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - initiatorName
str
- (optional) Custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface: will be created for the connection. - iscsiInterface
str
- (optional) iSCSI Interface Name that uses an iSCSI transport. Defaults to 'default' (tcp). - portals
List[str]
- (optional) iSCSI Target Portal List. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260). - readOnly
bool
- (optional) ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. - secretRef
SecretReference
- (optional) CHAP Secret for iSCSI target and initiator authentication
ISCSIVolumeSource
lightkube.models.core_v1.ISCSIVolumeSource
(iqn, lun, targetPortal, chapAuthDiscovery=None, chapAuthSession=None, fsType=None, initiatorName=None, iscsiInterface=None, portals=None, readOnly=None, secretRef=None)Represents an ISCSI disk. ISCSI volumes can only be mounted as read/write once. ISCSI volumes support ownership management and SELinux relabeling.
parameters
- iqn
str
- Target iSCSI Qualified Name. - lun
int
- iSCSI Target Lun number. - targetPortal
str
- iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260). - chapAuthDiscovery
bool
- (optional) whether support iSCSI Discovery CHAP authentication - chapAuthSession
bool
- (optional) whether support iSCSI Session CHAP authentication - fsType
str
- (optional) Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - initiatorName
str
- (optional) Custom iSCSI Initiator Name. If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface: will be created for the connection. - iscsiInterface
str
- (optional) iSCSI Interface Name that uses an iSCSI transport. Defaults to 'default' (tcp). - portals
List[str]
- (optional) iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port is other than default (typically TCP ports 860 and 3260). - readOnly
bool
- (optional) ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. - secretRef
LocalObjectReference
- (optional) CHAP Secret for iSCSI target and initiator authentication
KeyToPath
lightkube.models.core_v1.KeyToPath
(key, path, mode=None)Maps a string key to a path within a volume.
parameters
- key
str
- The key to project. - path
str
- The relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'. - mode
int
- (optional) Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.
Lifecycle
lightkube.models.core_v1.Lifecycle
(postStart=None, preStop=None)Lifecycle describes actions that the management system should take in response to container lifecycle events. For the PostStart and PreStop lifecycle handlers, management of the container blocks until the action is complete, unless the container process fails, in which case the handler is aborted.
parameters
- postStart
LifecycleHandler
- (optional) PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy. Other management of the container blocks until the hook completes. More info - preStop
LifecycleHandler
- (optional) PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info
LifecycleHandler
lightkube.models.core_v1.LifecycleHandler
(exec=None, httpGet=None, tcpSocket=None)LifecycleHandler defines a specific action that should be taken in a lifecycle hook. One and only one of the fields, except TCPSocket must be specified.
parameters
- exec
ExecAction
- (optional) Exec specifies the action to take. - httpGet
HTTPGetAction
- (optional) HTTPGet specifies the http request to perform. - tcpSocket
TCPSocketAction
- (optional) Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility. There are no validation of this field and lifecycle hooks will fail in runtime when tcp handler is specified.
LimitRange
lightkube.models.core_v1.LimitRange
(apiVersion=None, kind=None, metadata=None, spec=None)LimitRange sets resource usage limits for each kind of resource in a Namespace.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
LimitRangeSpec
- (optional) Spec defines the limits enforced. More info
LimitRangeItem
lightkube.models.core_v1.LimitRangeItem
(type, default=None, defaultRequest=None, max=None, maxLimitRequestRatio=None, min=None)LimitRangeItem defines a min/max usage limit for any resource that matches on kind.
parameters
- type
str
- Type of resource that this limit applies to. - default
dict
- (optional) Default resource requirement limit value by resource name if resource limit is omitted. - defaultRequest
dict
- (optional) DefaultRequest is the default resource requirement request value by resource name if resource request is omitted. - max
dict
- (optional) Max usage constraints on this kind by resource name. - maxLimitRequestRatio
dict
- (optional) MaxLimitRequestRatio if specified, the named resource must have a request and limit that are both non-zero where limit divided by request is less than or equal to the enumerated value; this represents the max burst for the named resource. - min
dict
- (optional) Min usage constraints on this kind by resource name.
LimitRangeList
lightkube.models.core_v1.LimitRangeList
(items, apiVersion=None, kind=None, metadata=None)LimitRangeList is a list of LimitRange items.
parameters
- items
LimitRange
- Items is a list of LimitRange objects. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
LimitRangeSpec
lightkube.models.core_v1.LimitRangeSpec
(limits)LimitRangeSpec defines a min/max usage limit for resources that match on kind.
parameters
- limits
LimitRangeItem
- Limits is the list of LimitRangeItem objects that are enforced.
LoadBalancerIngress
lightkube.models.core_v1.LoadBalancerIngress
(hostname=None, ip=None, ports=None)LoadBalancerIngress represents the status of a load-balancer ingress point: traffic intended for the service should be sent to an ingress point.
parameters
- hostname
str
- (optional) Hostname is set for load-balancer ingress points that are DNS based (typically AWS load-balancers) - ip
str
- (optional) IP is set for load-balancer ingress points that are IP based (typically GCE or OpenStack load-balancers) - ports
PortStatus
- (optional) Ports is a list of records of service ports If used, every port defined in the service should have an entry in it
LoadBalancerStatus
lightkube.models.core_v1.LoadBalancerStatus
(ingress=None)LoadBalancerStatus represents the status of a load-balancer.
parameters
- ingress
LoadBalancerIngress
- (optional) Ingress is a list containing ingress points for the load-balancer. Traffic intended for the service should be sent to these ingress points.
LocalObjectReference
lightkube.models.core_v1.LocalObjectReference
(name=None)LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.
parameters
- name
str
- (optional) Name of the referent. More info
LocalVolumeSource
lightkube.models.core_v1.LocalVolumeSource
(path, fsType=None)Local represents directly-attached storage with node affinity (Beta feature)
parameters
- path
str
- The full path to the volume on the node. It can be either a directory or block device (disk, partition, ...). - fsType
str
- (optional) Filesystem type to mount. It applies only when the Path is a block device. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". The default value is to auto-select a filesystem if unspecified.
NFSVolumeSource
lightkube.models.core_v1.NFSVolumeSource
(path, server, readOnly=None)Represents an NFS mount that lasts the lifetime of a pod. NFS volumes do not support ownership management or SELinux relabeling.
parameters
Namespace
lightkube.models.core_v1.Namespace
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)Namespace provides a scope for Names. Use of multiple namespaces is optional.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
NamespaceSpec
- (optional) Spec defines the behavior of the Namespace. More info - status
NamespaceStatus
- (optional) Status describes the current status of a Namespace. More info
NamespaceCondition
lightkube.models.core_v1.NamespaceCondition
(status, type, lastTransitionTime=None, message=None, reason=None)NamespaceCondition contains details about state of namespace.
parameters
- status
str
- Status of the condition, one of True, False, Unknown. - type
str
- Type of namespace controller condition. - lastTransitionTime
meta_v1.Time
- (optional) - message
str
- (optional) - reason
str
- (optional)
NamespaceList
lightkube.models.core_v1.NamespaceList
(items, apiVersion=None, kind=None, metadata=None)NamespaceList is a list of Namespaces.
parameters
- items
Namespace
- Items is the list of Namespace objects in the list. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
NamespaceSpec
lightkube.models.core_v1.NamespaceSpec
(finalizers=None)NamespaceSpec describes the attributes on a Namespace.
parameters
- finalizers
List[str]
- (optional) Finalizers is an opaque list of values that must be empty to permanently remove object from storage. More info
NamespaceStatus
lightkube.models.core_v1.NamespaceStatus
(conditions=None, phase=None)NamespaceStatus is information about the current status of a Namespace.
parameters
- conditions
NamespaceCondition
- (optional) Represents the latest available observations of a namespace's current state. - phase
str
- (optional) Phase is the current lifecycle phase of the namespace. More info
Node
lightkube.models.core_v1.Node
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)Node is a worker node in Kubernetes. Each node will have a unique identifier in the cache (i.e. in etcd).
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
NodeSpec
- (optional) Spec defines the behavior of a node. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status - status
NodeStatus
- (optional) Most recently observed status of the node. Populated by the system. Read-only. More info
NodeAddress
lightkube.models.core_v1.NodeAddress
(address, type)NodeAddress contains information for the node's address.
parameters
- address
str
- The node address. - type
str
- Node address type, one of Hostname, ExternalIP or InternalIP.
NodeAffinity
lightkube.models.core_v1.NodeAffinity
(preferredDuringSchedulingIgnoredDuringExecution=None, requiredDuringSchedulingIgnoredDuringExecution=None)Node affinity is a group of node affinity scheduling rules.
parameters
- preferredDuringSchedulingIgnoredDuringExecution
PreferredSchedulingTerm
- (optional) The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred. - requiredDuringSchedulingIgnoredDuringExecution
NodeSelector
- (optional) If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.
NodeCondition
lightkube.models.core_v1.NodeCondition
(status, type, lastHeartbeatTime=None, lastTransitionTime=None, message=None, reason=None)NodeCondition contains condition information for a node.
parameters
- status
str
- Status of the condition, one of True, False, Unknown. - type
str
- Type of node condition. - lastHeartbeatTime
meta_v1.Time
- (optional) Last time we got an update on a given condition. - lastTransitionTime
meta_v1.Time
- (optional) Last time the condition transit from one status to another. - message
str
- (optional) Human readable message indicating details about last transition. - reason
str
- (optional) (brief) reason for the condition's last transition.
NodeConfigSource
lightkube.models.core_v1.NodeConfigSource
(configMap=None)NodeConfigSource specifies a source of node configuration. Exactly one subfield (excluding metadata) must be non-nil. This API is deprecated since 1.22
parameters
- configMap
ConfigMapNodeConfigSource
- (optional) ConfigMap is a reference to a Node's ConfigMap
NodeConfigStatus
lightkube.models.core_v1.NodeConfigStatus
(active=None, assigned=None, error=None, lastKnownGood=None)NodeConfigStatus describes the status of the config assigned by Node.Spec.ConfigSource.
parameters
- active
NodeConfigSource
- (optional) Active reports the checkpointed config the node is actively using. Active will represent either the current version of the Assigned config, or the current LastKnownGood config, depending on whether attempting to use the Assigned config results in an error. - assigned
NodeConfigSource
- (optional) Assigned reports the checkpointed config the node will try to use. When Node.Spec.ConfigSource is updated, the node checkpoints the associated config payload to local disk, along with a record indicating intended config. The node refers to this record to choose its config checkpoint, and reports this record in Assigned. Assigned only updates in the status after the record has been checkpointed to disk. When the Kubelet is restarted, it tries to make the Assigned config the Active config by loading and validating the checkpointed payload identified by Assigned. - error
str
- (optional) Error describes any problems reconciling the Spec.ConfigSource to the Active config. Errors may occur, for example, attempting to checkpoint Spec.ConfigSource to the local Assigned record, attempting to checkpoint the payload associated with Spec.ConfigSource, attempting to load or validate the Assigned config, etc. Errors may occur at different points while syncing config. Earlier errors (e.g. download or checkpointing errors) will not result in a rollback to LastKnownGood, and may resolve across Kubelet retries. Later errors (e.g. loading or validating a checkpointed config) will result in a rollback to LastKnownGood. In the latter case, it is usually possible to resolve the error by fixing the config assigned in Spec.ConfigSource. You can find additional information for debugging by searching the error message in the Kubelet log. Error is a human-readable description of the error state; machines can check whether or not Error is empty, but should not rely on the stability of the Error text across Kubelet versions. - lastKnownGood
NodeConfigSource
- (optional) LastKnownGood reports the checkpointed config the node will fall back to when it encounters an error attempting to use the Assigned config. The Assigned config becomes the LastKnownGood config when the node determines that the Assigned config is stable and correct. This is currently implemented as a 10-minute soak period starting when the local record of Assigned config is updated. If the Assigned config is Active at the end of this period, it becomes the LastKnownGood. Note that if Spec.ConfigSource is reset to nil (use local defaults), the LastKnownGood is also immediately reset to nil, because the local default config is always assumed good. You should not make assumptions about the node's method of determining config stability and correctness, as this may change or become configurable in the future.
NodeDaemonEndpoints
lightkube.models.core_v1.NodeDaemonEndpoints
(kubeletEndpoint=None)NodeDaemonEndpoints lists ports opened by daemons running on the Node.
parameters
- kubeletEndpoint
DaemonEndpoint
- (optional) Endpoint on which Kubelet is listening.
NodeList
lightkube.models.core_v1.NodeList
(items, apiVersion=None, kind=None, metadata=None)NodeList is the whole list of all Nodes which have been registered with master.
parameters
- items
Node
- List of nodes - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
NodeSelector
lightkube.models.core_v1.NodeSelector
(nodeSelectorTerms)A node selector represents the union of the results of one or more label queries over a set of nodes; that is, it represents the OR of the selectors represented by the node selector terms.
parameters
- nodeSelectorTerms
NodeSelectorTerm
- Required. A list of node selector terms. The terms are ORed.
NodeSelectorRequirement
lightkube.models.core_v1.NodeSelectorRequirement
(key, operator, values=None)A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.
parameters
- key
str
- The label key that the selector applies to. - operator
str
- Represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. - values
List[str]
- (optional) An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.
NodeSelectorTerm
lightkube.models.core_v1.NodeSelectorTerm
(matchExpressions=None, matchFields=None)A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.
parameters
- matchExpressions
NodeSelectorRequirement
- (optional) A list of node selector requirements by node's labels. - matchFields
NodeSelectorRequirement
- (optional) A list of node selector requirements by node's fields.
NodeSpec
lightkube.models.core_v1.NodeSpec
(configSource=None, externalID=None, podCIDR=None, podCIDRs=None, providerID=None, taints=None, unschedulable=None)NodeSpec describes the attributes that a node is created with.
parameters
- configSource
NodeConfigSource
- (optional) Deprecated. If specified, the source of the node's configuration. The DynamicKubeletConfig feature gate must be enabled for the Kubelet to use this field. This field is deprecated as of 1.22: https://git.k8s.io/enhancements/keps/sig-node/281-dynamic-kubelet-configuration - externalID
str
- (optional) Deprecated. Not all kubelets will set this field. Remove field after 1.13. see: https://issues.k8s.io/61966 - podCIDR
str
- (optional) PodCIDR represents the pod IP range assigned to the node. - podCIDRs
List[str]
- (optional) podCIDRs represents the IP ranges assigned to the node for usage by Pods on that node. If this field is specified, the 0th entry must match the podCIDR field. It may contain at most 1 value for each of IPv4 and IPv6. - providerID
str
- (optional) ID of the node assigned by the cloud provider in the format::// - taints
Taint
- (optional) If specified, the node's taints. - unschedulable
bool
- (optional) Unschedulable controls node schedulability of new pods. By default, node is schedulable. More info
NodeStatus
lightkube.models.core_v1.NodeStatus
(addresses=None, allocatable=None, capacity=None, conditions=None, config=None, daemonEndpoints=None, images=None, nodeInfo=None, phase=None, volumesAttached=None, volumesInUse=None)NodeStatus is information about the current status of a node.
parameters
- addresses
NodeAddress
- (optional) List of addresses reachable to the node. Queried from cloud provider, if available. More info Note: This field is declared as mergeable, but the merge key is not sufficiently unique, which can cause data corruption when it is merged. Callers should instead use a full-replacement patch. See http://pr.k8s.io/79391 for an example. - allocatable
dict
- (optional) Allocatable represents the resources of a node that are available for scheduling. Defaults to Capacity. - capacity
dict
- (optional) Capacity represents the total resources of a node. More info - conditions
NodeCondition
- (optional) Conditions is an array of current observed node conditions. More info - config
NodeConfigStatus
- (optional) Status of the config assigned to the node via the dynamic Kubelet config feature. - daemonEndpoints
NodeDaemonEndpoints
- (optional) Endpoints of daemons running on the Node. - images
ContainerImage
- (optional) List of container images on this node - nodeInfo
NodeSystemInfo
- (optional) Set of ids/uuids to uniquely identify the node. More info - phase
str
- (optional) NodePhase is the recently observed lifecycle phase of the node. More info The field is never populated, and now is deprecated. - volumesAttached
AttachedVolume
- (optional) List of volumes that are attached to the node. - volumesInUse
List[str]
- (optional) List of attachable volumes in use (mounted) by the node.
NodeSystemInfo
lightkube.models.core_v1.NodeSystemInfo
(architecture, bootID, containerRuntimeVersion, kernelVersion, kubeProxyVersion, kubeletVersion, machineID, operatingSystem, osImage, systemUUID)NodeSystemInfo is a set of ids/uuids to uniquely identify the node.
parameters
- architecture
str
- The Architecture reported by the node - bootID
str
- Boot ID reported by the node. - containerRuntimeVersion
str
- ContainerRuntime Version reported by the node through runtime remote API (e.g. docker://1.5.0). - kernelVersion
str
- Kernel Version reported by the node from 'uname -r' (e.g. 3.16.0-0.bpo.4-amd64). - kubeProxyVersion
str
- KubeProxy Version reported by the node. - kubeletVersion
str
- Kubelet Version reported by the node. - machineID
str
- MachineID reported by the node. For unique machine identification in the cluster this field is preferred. Learn more from man(5) machine-id: http://man7.org/linux/man-pages/man5/machine-id.5.html - operatingSystem
str
- The Operating System reported by the node - osImage
str
- OS Image reported by the node from /etc/os-release (e.g. Debian GNU/Linux 7 (wheezy)). - systemUUID
str
- SystemUUID reported by the node. For unique machine identification MachineID is preferred. This field is specific to Red Hat hosts https://access.redhat.com/documentation/en-us/red_hat_subscription_management/1/html/rhsm/uuid
ObjectFieldSelector
lightkube.models.core_v1.ObjectFieldSelector
(fieldPath, apiVersion=None)ObjectFieldSelector selects an APIVersioned field of an object.
parameters
- fieldPath
str
- Path of the field to select in the specified API version. - apiVersion
str
- (optional) Version of the schema the FieldPath is written in terms of, defaults to "v1".
ObjectReference
lightkube.models.core_v1.ObjectReference
(apiVersion=None, fieldPath=None, kind=None, name=None, namespace=None, resourceVersion=None, uid=None)ObjectReference contains enough information to let you inspect or modify the referred object.
parameters
- apiVersion
str
- (optional) API version of the referent. - fieldPath
str
- (optional) If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: "spec.containers{name}" (where "name" refers to the name of the container that triggered the event) or if no container name is specified "spec.containers[2]" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object. - kind
str
- (optional) Kind of the referent. More info - name
str
- (optional) Name of the referent. More info - namespace
str
- (optional) Namespace of the referent. More info - resourceVersion
str
- (optional) Specific resourceVersion to which this reference is made, if any. More info - uid
str
- (optional) UID of the referent. More info
PersistentVolume
lightkube.models.core_v1.PersistentVolume
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)PersistentVolume (PV) is a storage resource provisioned by an administrator. It is analogous to a node. More info
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
PersistentVolumeSpec
- (optional) Spec defines a specification of a persistent volume owned by the cluster. Provisioned by an administrator. More info - status
PersistentVolumeStatus
- (optional) Status represents the current information/status for the persistent volume. Populated by the system. Read-only. More info
PersistentVolumeClaim
lightkube.models.core_v1.PersistentVolumeClaim
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)PersistentVolumeClaim is a user's request for and claim to a persistent volume
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
PersistentVolumeClaimSpec
- (optional) Spec defines the desired characteristics of a volume requested by a pod author. More info - status
PersistentVolumeClaimStatus
- (optional) Status represents the current information/status of a persistent volume claim. Read-only. More info
PersistentVolumeClaimCondition
lightkube.models.core_v1.PersistentVolumeClaimCondition
(status, type, lastProbeTime=None, lastTransitionTime=None, message=None, reason=None)PersistentVolumeClaimCondition contails details about state of pvc
parameters
- status
str
- - type
str
- - lastProbeTime
meta_v1.Time
- (optional) Last time we probed the condition. - lastTransitionTime
meta_v1.Time
- (optional) Last time the condition transitioned from one status to another. - message
str
- (optional) Human-readable message indicating details about last transition. - reason
str
- (optional) Unique, this should be a short, machine understandable string that gives the reason for condition's last transition. If it reports "ResizeStarted" that means the underlying persistent volume is being resized.
PersistentVolumeClaimList
lightkube.models.core_v1.PersistentVolumeClaimList
(items, apiVersion=None, kind=None, metadata=None)PersistentVolumeClaimList is a list of PersistentVolumeClaim items.
parameters
- items
PersistentVolumeClaim
- A list of persistent volume claims. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
PersistentVolumeClaimSpec
lightkube.models.core_v1.PersistentVolumeClaimSpec
(accessModes=None, dataSource=None, dataSourceRef=None, resources=None, selector=None, storageClassName=None, volumeMode=None, volumeName=None)PersistentVolumeClaimSpec describes the common attributes of storage devices and allows a Source for provider-specific attributes
parameters
- accessModes
List[str]
- (optional) AccessModes contains the desired access modes the volume should have. More info - dataSource
TypedLocalObjectReference
- (optional) This field can be used to specify either: * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) * An existing PVC (PersistentVolumeClaim) If the provisioner or an external controller can support the specified data source, it will create a new volume based on the contents of the specified data source. If the AnyVolumeDataSource feature gate is enabled, this field will always have the same contents as the DataSourceRef field. - dataSourceRef
TypedLocalObjectReference
- (optional) Specifies the object from which to populate the volume with data, if a non-empty volume is desired. This may be any local object from a non-empty API group (non core object) or a PersistentVolumeClaim object. When this field is specified, volume binding will only succeed if the type of the specified object matches some installed volume populator or dynamic provisioner. This field will replace the functionality of the DataSource field and as such if both fields are non-empty, they must have the same value. For backwards compatibility, both fields (DataSource and DataSourceRef) will be set to the same value automatically if one of them is empty and the other is non-empty. There are two important differences between DataSource and DataSourceRef: * While DataSource only allows two specific types of objects, DataSourceRef allows any non-core object, as well as PersistentVolumeClaim objects. - While DataSource ignores disallowed values (dropping them), DataSourceRef preserves all values, and generates an error if a disallowed value is specified. (Alpha) Using this field requires the AnyVolumeDataSource feature gate to be enabled.
- resources
ResourceRequirements
- (optional) Resources represents the minimum resources the volume should have. If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements that are lower than previous value but must still be higher than capacity recorded in the status field of the claim. More info - selector
meta_v1.LabelSelector
- (optional) A label query over volumes to consider for binding. - storageClassName
str
- (optional) Name of the StorageClass required by the claim. More info - volumeMode
str
- (optional) volumeMode defines what type of volume is required by the claim. Value of Filesystem is implied when not included in claim spec. - volumeName
str
- (optional) VolumeName is the binding reference to the PersistentVolume backing this claim.
PersistentVolumeClaimStatus
lightkube.models.core_v1.PersistentVolumeClaimStatus
(accessModes=None, allocatedResources=None, capacity=None, conditions=None, phase=None, resizeStatus=None)PersistentVolumeClaimStatus is the current status of a persistent volume claim.
parameters
- accessModes
List[str]
- (optional) AccessModes contains the actual access modes the volume backing the PVC has. More info - allocatedResources
dict
- (optional) The storage resource within AllocatedResources tracks the capacity allocated to a PVC. It may be larger than the actual capacity when a volume expansion operation is requested. For storage quota, the larger value from allocatedResources and PVC.spec.resources is used. If allocatedResources is not set, PVC.spec.resources alone is used for quota calculation. If a volume expansion capacity request is lowered, allocatedResources is only lowered if there are no expansion operations in progress and if the actual volume capacity is equal or lower than the requested capacity. This is an alpha field and requires enabling RecoverVolumeExpansionFailure feature. - capacity
dict
- (optional) Represents the actual resources of the underlying volume. - conditions
PersistentVolumeClaimCondition
- (optional) Current Condition of persistent volume claim. If underlying persistent volume is being resized then the Condition will be set to 'ResizeStarted'. - phase
str
- (optional) Phase represents the current phase of PersistentVolumeClaim. - resizeStatus
str
- (optional) ResizeStatus stores status of resize operation. ResizeStatus is not set by default but when expansion is complete resizeStatus is set to empty string by resize controller or kubelet. This is an alpha field and requires enabling RecoverVolumeExpansionFailure feature.
PersistentVolumeClaimTemplate
lightkube.models.core_v1.PersistentVolumeClaimTemplate
(spec, metadata=None)PersistentVolumeClaimTemplate is used to produce PersistentVolumeClaim objects as part of an EphemeralVolumeSource.
parameters
- spec
PersistentVolumeClaimSpec
- The specification for the PersistentVolumeClaim. The entire content is copied unchanged into the PVC that gets created from this template. The same fields as in a PersistentVolumeClaim are also valid here. - metadata
meta_v1.ObjectMeta
- (optional) May contain labels and annotations that will be copied into the PVC when creating it. No other fields are allowed and will be rejected during validation.
PersistentVolumeClaimVolumeSource
lightkube.models.core_v1.PersistentVolumeClaimVolumeSource
(claimName, readOnly=None)PersistentVolumeClaimVolumeSource references the user's PVC in the same namespace. This volume finds the bound PV and mounts that volume for the pod. A PersistentVolumeClaimVolumeSource is, essentially, a wrapper around another type of volume that is owned by someone else (the system).
parameters
- claimName
str
- ClaimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. More info - readOnly
bool
- (optional) Will force the ReadOnly setting in VolumeMounts. Default false.
PersistentVolumeList
lightkube.models.core_v1.PersistentVolumeList
(items, apiVersion=None, kind=None, metadata=None)PersistentVolumeList is a list of PersistentVolume items.
parameters
- items
PersistentVolume
- List of persistent volumes. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
PersistentVolumeSpec
lightkube.models.core_v1.PersistentVolumeSpec
(accessModes=None, awsElasticBlockStore=None, azureDisk=None, azureFile=None, capacity=None, cephfs=None, cinder=None, claimRef=None, csi=None, fc=None, flexVolume=None, flocker=None, gcePersistentDisk=None, glusterfs=None, hostPath=None, iscsi=None, local=None, mountOptions=None, nfs=None, nodeAffinity=None, persistentVolumeReclaimPolicy=None, photonPersistentDisk=None, portworxVolume=None, quobyte=None, rbd=None, scaleIO=None, storageClassName=None, storageos=None, volumeMode=None, vsphereVolume=None)PersistentVolumeSpec is the specification of a persistent volume.
parameters
- accessModes
List[str]
- (optional) AccessModes contains all ways the volume can be mounted. More info - awsElasticBlockStore
AWSElasticBlockStoreVolumeSource
- (optional) AWSElasticBlockStore represents an AWS Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info - azureDisk
AzureDiskVolumeSource
- (optional) AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod. - azureFile
AzureFilePersistentVolumeSource
- (optional) AzureFile represents an Azure File Service mount on the host and bind mount to the pod. - capacity
dict
- (optional) A description of the persistent volume's resources and capacity. More info - cephfs
CephFSPersistentVolumeSource
- (optional) CephFS represents a Ceph FS mount on the host that shares a pod's lifetime - cinder
CinderPersistentVolumeSource
- (optional) Cinder represents a cinder volume attached and mounted on kubelets host machine. More info - claimRef
ObjectReference
- (optional) ClaimRef is part of a bi-directional binding between PersistentVolume and PersistentVolumeClaim. Expected to be non-nil when bound. claim.VolumeName is the authoritative bind between PV and PVC. More info - csi
CSIPersistentVolumeSource
- (optional) CSI represents storage that is handled by an external CSI driver (Beta feature). - fc
FCVolumeSource
- (optional) FC represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod. - flexVolume
FlexPersistentVolumeSource
- (optional) FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin. - flocker
FlockerVolumeSource
- (optional) Flocker represents a Flocker volume attached to a kubelet's host machine and exposed to the pod for its usage. This depends on the Flocker control service being running - gcePersistentDisk
GCEPersistentDiskVolumeSource
- (optional) GCEPersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Provisioned by an admin. More info - glusterfs
GlusterfsPersistentVolumeSource
- (optional) Glusterfs represents a Glusterfs volume that is attached to a host and exposed to the pod. Provisioned by an admin. More info - hostPath
HostPathVolumeSource
- (optional) HostPath represents a directory on the host. Provisioned by a developer or tester. This is useful for single-node development and testing only! On-host storage is not supported in any way and WILL NOT WORK in a multi-node cluster. More info - iscsi
ISCSIPersistentVolumeSource
- (optional) ISCSI represents an ISCSI Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Provisioned by an admin. - local
LocalVolumeSource
- (optional) Local represents directly-attached storage with node affinity - mountOptions
List[str]
- (optional) A list of mount options, e.g. ["ro", "soft"]. Not validated - mount will simply fail if one is invalid. More info - nfs
NFSVolumeSource
- (optional) NFS represents an NFS mount on the host. Provisioned by an admin. More info - nodeAffinity
VolumeNodeAffinity
- (optional) NodeAffinity defines constraints that limit what nodes this volume can be accessed from. This field influences the scheduling of pods that use this volume. - persistentVolumeReclaimPolicy
str
- (optional) What happens to a persistent volume when released from its claim. Valid options are Retain (default for manually created PersistentVolumes), Delete (default for dynamically provisioned PersistentVolumes), and Recycle (deprecated). Recycle must be supported by the volume plugin underlying this PersistentVolume. More info - photonPersistentDisk
PhotonPersistentDiskVolumeSource
- (optional) PhotonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine - portworxVolume
PortworxVolumeSource
- (optional) PortworxVolume represents a portworx volume attached and mounted on kubelets host machine - quobyte
QuobyteVolumeSource
- (optional) Quobyte represents a Quobyte mount on the host that shares a pod's lifetime - rbd
RBDPersistentVolumeSource
- (optional) RBD represents a Rados Block Device mount on the host that shares a pod's lifetime. More info - scaleIO
ScaleIOPersistentVolumeSource
- (optional) ScaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes. - storageClassName
str
- (optional) Name of StorageClass to which this persistent volume belongs. Empty value means that this volume does not belong to any StorageClass. - storageos
StorageOSPersistentVolumeSource
- (optional) StorageOS represents a StorageOS volume that is attached to the kubelet's host machine and mounted into the pod More info - volumeMode
str
- (optional) volumeMode defines if a volume is intended to be used with a formatted filesystem or to remain in raw block state. Value of Filesystem is implied when not included in spec. - vsphereVolume
VsphereVirtualDiskVolumeSource
- (optional) VsphereVolume represents a vSphere volume attached and mounted on kubelets host machine
PersistentVolumeStatus
lightkube.models.core_v1.PersistentVolumeStatus
(message=None, phase=None, reason=None)PersistentVolumeStatus is the current status of a persistent volume.
parameters
- message
str
- (optional) A human-readable message indicating details about why the volume is in this state. - phase
str
- (optional) Phase indicates if a volume is available, bound to a claim, or released by a claim. More info - reason
str
- (optional) Reason is a brief CamelCase string that describes any failure and is meant for machine parsing and tidy display in the CLI.
PhotonPersistentDiskVolumeSource
lightkube.models.core_v1.PhotonPersistentDiskVolumeSource
(pdID, fsType=None)Represents a Photon Controller persistent disk resource.
parameters
- pdID
str
- ID that identifies Photon Controller persistent disk - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.
Pod
lightkube.models.core_v1.Pod
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)Pod is a collection of containers that can run on a host. This resource is created by clients and scheduled onto hosts.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
PodSpec
- (optional) Specification of the desired behavior of the pod. More info - status
PodStatus
- (optional) Most recently observed status of the pod. This data may not be up to date. Populated by the system. Read-only. More info
PodAffinity
lightkube.models.core_v1.PodAffinity
(preferredDuringSchedulingIgnoredDuringExecution=None, requiredDuringSchedulingIgnoredDuringExecution=None)Pod affinity is a group of inter pod affinity scheduling rules.
parameters
- preferredDuringSchedulingIgnoredDuringExecution
WeightedPodAffinityTerm
- (optional) The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred. - requiredDuringSchedulingIgnoredDuringExecution
PodAffinityTerm
- (optional) If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.
PodAffinityTerm
lightkube.models.core_v1.PodAffinityTerm
(topologyKey, labelSelector=None, namespaceSelector=None, namespaces=None)Defines a set of pods (namely those matching the labelSelector relative to the
given namespace(s)) that this pod should be co-located (affinity) or not
co-located (anti-affinity) with, where co-located is defined as running on a
node whose value of the label with key
parameters
- topologyKey
str
- This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed. - labelSelector
meta_v1.LabelSelector
- (optional) A label query over a set of resources, in this case pods. - namespaceSelector
meta_v1.LabelSelector
- (optional) A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod's namespace". An empty selector ({}) matches all namespaces. This field is beta-level and is only honored when PodAffinityNamespaceSelector feature is enabled. - namespaces
List[str]
- (optional) namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod's namespace"
PodAntiAffinity
lightkube.models.core_v1.PodAntiAffinity
(preferredDuringSchedulingIgnoredDuringExecution=None, requiredDuringSchedulingIgnoredDuringExecution=None)Pod anti affinity is a group of inter pod anti affinity scheduling rules.
parameters
- preferredDuringSchedulingIgnoredDuringExecution
WeightedPodAffinityTerm
- (optional) The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred. - requiredDuringSchedulingIgnoredDuringExecution
PodAffinityTerm
- (optional) If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.
PodCondition
lightkube.models.core_v1.PodCondition
(status, type, lastProbeTime=None, lastTransitionTime=None, message=None, reason=None)PodCondition contains details for the current condition of this pod.
parameters
- status
str
- Status is the status of the condition. Can be True, False, Unknown. More info - type
str
- Type is the type of the condition. More info - lastProbeTime
meta_v1.Time
- (optional) Last time we probed the condition. - lastTransitionTime
meta_v1.Time
- (optional) Last time the condition transitioned from one status to another. - message
str
- (optional) Human-readable message indicating details about last transition. - reason
str
- (optional) Unique, one-word, CamelCase reason for the condition's last transition.
PodDNSConfig
lightkube.models.core_v1.PodDNSConfig
(nameservers=None, options=None, searches=None)PodDNSConfig defines the DNS parameters of a pod in addition to those generated from DNSPolicy.
parameters
- nameservers
List[str]
- (optional) A list of DNS name server IP addresses. This will be appended to the base nameservers generated from DNSPolicy. Duplicated nameservers will be removed. - options
PodDNSConfigOption
- (optional) A list of DNS resolver options. This will be merged with the base options generated from DNSPolicy. Duplicated entries will be removed. Resolution options given in Options will override those that appear in the base DNSPolicy. - searches
List[str]
- (optional) A list of DNS search domains for host-name lookup. This will be appended to the base search paths generated from DNSPolicy. Duplicated search paths will be removed.
PodDNSConfigOption
lightkube.models.core_v1.PodDNSConfigOption
(name=None, value=None)PodDNSConfigOption defines DNS resolver options of a pod.
parameters
- name
str
- (optional) Required. - value
str
- (optional)
PodIP
lightkube.models.core_v1.PodIP
(ip=None)IP address information for entries in the (plural) PodIPs field. Each entry includes: IP: An IP address allocated to the pod. Routable at least within the cluster.
parameters
- ip
str
- (optional) ip is an IP address (IPv4 or IPv6) assigned to the pod
PodList
lightkube.models.core_v1.PodList
(items, apiVersion=None, kind=None, metadata=None)PodList is a list of Pods.
parameters
- items
Pod
- List of pods. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
PodOS
lightkube.models.core_v1.PodOS
(name)PodOS defines the OS parameters of a pod.
parameters
- name
str
- Name is the name of the operating system. The currently supported values are linux and windows. Additional value may be defined in future and can be one of: https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration Clients should expect to handle additional values and treat unrecognized values in this field as os: null
PodReadinessGate
lightkube.models.core_v1.PodReadinessGate
(conditionType)PodReadinessGate contains the reference to a pod condition
parameters
- conditionType
str
- ConditionType refers to a condition in the pod's condition list with matching type.
PodSecurityContext
lightkube.models.core_v1.PodSecurityContext
(fsGroup=None, fsGroupChangePolicy=None, runAsGroup=None, runAsNonRoot=None, runAsUser=None, seLinuxOptions=None, seccompProfile=None, supplementalGroups=None, sysctls=None, windowsOptions=None)PodSecurityContext holds pod-level security attributes and common container settings. Some fields are also present in container.securityContext. Field values of container.securityContext take precedence over field values of PodSecurityContext.
parameters
- fsGroup
int
- (optional) A special supplemental group that applies to all containers in a pod. Some volume types allow the Kubelet to change the ownership of that volume to be owned by the pod: - The owning GID will be the FSGroup 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) 3. The permission bits are OR'd with rw-rw---- If unset, the Kubelet will not modify the ownership and permissions of any volume. Note that this field cannot be set when spec.os.name is windows.
- fsGroupChangePolicy
str
- (optional) fsGroupChangePolicy defines behavior of changing ownership and permission of the volume before being exposed inside Pod. This field will only apply to volume types which support fsGroup based ownership(and permissions). It will have no effect on ephemeral volume types such as: secret, configmaps and emptydir. Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. Note that this field cannot be set when spec.os.name is windows. - runAsGroup
int
- (optional) The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows. - runAsNonRoot
bool
- (optional) Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - runAsUser
int
- (optional) The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows. - seLinuxOptions
SELinuxOptions
- (optional) The SELinux context to be applied to all containers. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows. - seccompProfile
SeccompProfile
- (optional) The seccomp options to use by the containers in this pod. Note that this field cannot be set when spec.os.name is windows. - supplementalGroups
List[int]
- (optional) A list of groups applied to the first process run in each container, in addition to the container's primary GID. If unspecified, no groups will be added to any container. Note that this field cannot be set when spec.os.name is windows. - sysctls
Sysctl
- (optional) Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported sysctls (by the container runtime) might fail to launch. Note that this field cannot be set when spec.os.name is windows. - windowsOptions
WindowsSecurityContextOptions
- (optional) The Windows specific settings applied to all containers. If unspecified, the options within a container's SecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
PodSpec
lightkube.models.core_v1.PodSpec
(containers, activeDeadlineSeconds=None, affinity=None, automountServiceAccountToken=None, dnsConfig=None, dnsPolicy=None, enableServiceLinks=None, ephemeralContainers=None, hostAliases=None, hostIPC=None, hostNetwork=None, hostPID=None, hostname=None, imagePullSecrets=None, initContainers=None, nodeName=None, nodeSelector=None, os=None, overhead=None, preemptionPolicy=None, priority=None, priorityClassName=None, readinessGates=None, restartPolicy=None, runtimeClassName=None, schedulerName=None, securityContext=None, serviceAccount=None, serviceAccountName=None, setHostnameAsFQDN=None, shareProcessNamespace=None, subdomain=None, terminationGracePeriodSeconds=None, tolerations=None, topologySpreadConstraints=None, volumes=None)PodSpec is a description of a pod.
parameters
- containers
Container
- List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated. - activeDeadlineSeconds
int
- (optional) Optional duration in seconds the pod may be active on the node relative to StartTime before the system will actively try to mark it failed and kill associated containers. Value must be a positive integer. - affinity
Affinity
- (optional) If specified, the pod's scheduling constraints - automountServiceAccountToken
bool
- (optional) AutomountServiceAccountToken indicates whether a service account token should be automatically mounted. - dnsConfig
PodDNSConfig
- (optional) Specifies the DNS parameters of a pod. Parameters specified here will be merged to the generated DNS configuration based on DNSPolicy. - dnsPolicy
str
- (optional) Set DNS policy for the pod. Defaults to "ClusterFirst". Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. To have DNS options set along with hostNetwork, you have to specify DNS policy explicitly to 'ClusterFirstWithHostNet'. - enableServiceLinks
bool
- (optional) EnableServiceLinks indicates whether information about services should be injected into pod's environment variables, matching the syntax of Docker links. Optional: Defaults to true. - ephemeralContainers
EphemeralContainer
- (optional) List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource. This field is beta-level and available on clusters that haven't disabled the EphemeralContainers feature gate. - hostAliases
HostAlias
- (optional) HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts file if specified. This is only valid for non-hostNetwork pods. - hostIPC
bool
- (optional) Use the host's ipc namespace. Optional: Default to false. - hostNetwork
bool
- (optional) Host networking requested for this pod. Use the host's network namespace. If this option is set, the ports that will be used must be specified. Default to false. - hostPID
bool
- (optional) Use the host's pid namespace. Optional: Default to false. - hostname
str
- (optional) Specifies the hostname of the Pod If not specified, the pod's hostname will be set to a system-defined value. - imagePullSecrets
LocalObjectReference
- (optional) ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. For example, in the case of docker, only DockerConfig type secrets are honored. More info - initContainers
Container
- (optional) List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info - nodeName
str
- (optional) NodeName is a request to schedule this pod onto a specific node. If it is non-empty, the scheduler simply schedules this pod onto that node, assuming that it fits resource requirements. - nodeSelector
dict
- (optional) NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node's labels for the pod to be scheduled on that node. More info - os
PodOS
- (optional) Specifies the OS of the containers in the pod. Some pod and container fields are restricted if this is set. If the OS field is set to linux, the following fields must be unset: -securityContext.windowsOptions If the OS field is set to windows, following fields must be unset: - spec.hostPID - spec.hostIPC - spec.securityContext.seLinuxOptions - spec.securityContext.seccompProfile - spec.securityContext.fsGroup - spec.securityContext.fsGroupChangePolicy - spec.securityContext.sysctls - spec.shareProcessNamespace - spec.securityContext.runAsUser - spec.securityContext.runAsGroup - spec.securityContext.supplementalGroups - spec.containers[].securityContext.seLinuxOptions - spec.containers[].securityContext.seccompProfile - spec.containers[].securityContext.capabilities - spec.containers[].securityContext.readOnlyRootFilesystem - spec.containers[].securityContext.privileged - spec.containers[].securityContext.allowPrivilegeEscalation - spec.containers[].securityContext.procMount - spec.containers[].securityContext.runAsUser - spec.containers[*].securityContext.runAsGroup This is an alpha field and requires the IdentifyPodOS feature - overhead
dict
- (optional) Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. This field will be autopopulated at admission time by the RuntimeClass admission controller. If the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. The RuntimeClass admission controller will reject Pod create requests which have the overhead already set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. More info This field is beta-level as of Kubernetes v1.18, and is only honored by servers that enable the PodOverhead feature. - preemptionPolicy
str
- (optional) PreemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset. This field is beta-level, gated by the NonPreemptingPriority feature-gate. - priority
int
- (optional) The priority value. Various system components use this field to find the priority of the pod. When Priority Admission Controller is enabled, it prevents users from setting this field. The admission controller populates this field from PriorityClassName. The higher the value, the higher the priority. - priorityClassName
str
- (optional) If specified, indicates the pod's priority. "system-node-critical" and "system-cluster-critical" are two special keywords which indicate the highest priorities with the former being the highest priority. Any other name must be defined by creating a PriorityClass object with that name. If not specified, the pod priority will be default or zero if there is no default. - readinessGates
PodReadinessGate
- (optional) If specified, all readiness gates will be evaluated for pod readiness. A pod is ready when all its containers are ready AND all conditions specified in the readiness gates have status equal to "True" More info - restartPolicy
str
- (optional) Restart policy for all containers within the pod. One of Always, OnFailure, Never. Default to Always. More info - runtimeClassName
str
- (optional) RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an empty definition that uses the default runtime handler. More info This is a beta feature as of Kubernetes v1.14. - schedulerName
str
- (optional) If specified, the pod will be dispatched by specified scheduler. If not specified, the pod will be dispatched by default scheduler. - securityContext
PodSecurityContext
- (optional) SecurityContext holds pod-level security attributes and common container settings. Optional: Defaults to empty. See type description for default values of each field. - serviceAccount
str
- (optional) DeprecatedServiceAccount is a depreciated alias for ServiceAccountName. Deprecated: Use serviceAccountName instead. - serviceAccountName
str
- (optional) ServiceAccountName is the name of the ServiceAccount to use to run this pod. More info - setHostnameAsFQDN
bool
- (optional) If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters to FQDN. If a pod does not have FQDN, this has no effect. Default to false. - shareProcessNamespace
bool
- (optional) Share a single process namespace between all of the containers in a pod. When this is set containers will be able to view and signal processes from other containers in the same pod, and the first process in each container will not be assigned PID 1. HostPID and ShareProcessNamespace cannot both be set. Optional: Default to false. - subdomain
str
- (optional) If specified, the fully qualified Pod hostname will be ". . .svc. ". If not specified, the pod will not have a domainname at all. - terminationGracePeriodSeconds
int
- (optional) Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). If this value is nil, the default grace period will be used instead. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. Defaults to 30 seconds. - tolerations
Toleration
- (optional) If specified, the pod's tolerations. - topologySpreadConstraints
TopologySpreadConstraint
- (optional) TopologySpreadConstraints describes how a group of pods ought to spread across topology domains. Scheduler will schedule pods in a way which abides by the constraints. All topologySpreadConstraints are ANDed. - volumes
Volume
- (optional) List of volumes that can be mounted by containers belonging to the pod. More info
PodStatus
lightkube.models.core_v1.PodStatus
(conditions=None, containerStatuses=None, ephemeralContainerStatuses=None, hostIP=None, initContainerStatuses=None, message=None, nominatedNodeName=None, phase=None, podIP=None, podIPs=None, qosClass=None, reason=None, startTime=None)PodStatus represents information about the status of a pod. Status may trail the actual state of a system, especially if the node that hosts the pod cannot contact the control plane.
parameters
- conditions
PodCondition
- (optional) Current service state of pod. More info - containerStatuses
ContainerStatus
- (optional) The list has one entry per container in the manifest. Each entry is currently the output ofdocker inspect
. More info - ephemeralContainerStatuses
ContainerStatus
- (optional) Status for any ephemeral containers that have run in this pod. This field is beta-level and available on clusters that haven't disabled the EphemeralContainers feature gate. - hostIP
str
- (optional) IP address of the host to which the pod is assigned. Empty if not yet scheduled. - initContainerStatuses
ContainerStatus
- (optional) The list has one entry per init container in the manifest. The most recent successful init container will have ready = true, the most recently started container will have startTime set. More info - message
str
- (optional) A human readable message indicating details about why the pod is in this condition. - nominatedNodeName
str
- (optional) nominatedNodeName is set only when this pod preempts other pods on the node, but it cannot be scheduled right away as preemption victims receive their graceful termination periods. This field does not guarantee that the pod will be scheduled on this node. Scheduler may decide to place the pod elsewhere if other nodes become available sooner. Scheduler may also decide to give the resources on this node to a higher priority pod that is created after preemption. As a result, this field may be different than PodSpec.nodeName when the pod is scheduled. - phase
str
- (optional) The phase of a Pod is a simple, high-level summary of where the Pod is in its lifecycle. The conditions array, the reason and message fields, and the individual container status arrays contain more detail about the pod's status. There are five possible phase values: Pending: The pod has been accepted by the Kubernetes system, but one or more of the container images has not been created. This includes time before being scheduled as well as time spent downloading images over the network, which could take a while. Running: The pod has been bound to a node, and all of the containers have been created. At least one container is still running, or is in the process of starting or restarting. Succeeded: All containers in the pod have terminated in success, and will not be restarted. Failed: All containers in the pod have terminated, and at least one container has terminated in failure. The container either exited with non-zero status or was terminated by the system. Unknown: For some reason the state of the pod could not be obtained, typically due to an error in communicating with the host of the pod. More info - podIP
str
- (optional) IP address allocated to the pod. Routable at least within the cluster. Empty if not yet allocated. - podIPs
PodIP
- (optional) podIPs holds the IP addresses allocated to the pod. If this field is specified, the 0th entry must match the podIP field. Pods may be allocated at most 1 value for each of IPv4 and IPv6. This list is empty if no IPs have been allocated yet. - qosClass
str
- (optional) The Quality of Service (QOS) classification assigned to the pod based on resource requirements See PodQOSClass type for available QOS classes More info - reason
str
- (optional) A brief CamelCase message indicating details about why the pod is in this state. e.g. 'Evicted' - startTime
meta_v1.Time
- (optional) RFC 3339 date and time at which the object was acknowledged by the Kubelet. This is before the Kubelet pulled the container image(s) for the pod.
PodTemplate
lightkube.models.core_v1.PodTemplate
(apiVersion=None, kind=None, metadata=None, template=None)PodTemplate describes a template for creating copies of a predefined pod.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - template
PodTemplateSpec
- (optional) Template defines the pods that will be created from this pod template. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
PodTemplateList
lightkube.models.core_v1.PodTemplateList
(items, apiVersion=None, kind=None, metadata=None)PodTemplateList is a list of PodTemplates.
parameters
- items
PodTemplate
- List of pod templates - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
PodTemplateSpec
lightkube.models.core_v1.PodTemplateSpec
(metadata=None, spec=None)PodTemplateSpec describes the data a pod should have when created from a template
parameters
- metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
PodSpec
- (optional) Specification of the desired behavior of the pod. More info
PortStatus
lightkube.models.core_v1.PortStatus
(port, protocol, error=None)parameters
- port
int
- Port is the port number of the service port of which status is recorded here - protocol
str
- Protocol is the protocol of the service port of which status is recorded here The supported values are: "TCP", "UDP", "SCTP" - error
str
- (optional) Error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use CamelCase names - cloud provider specific error values must have names that comply with the format foo.example.com/CamelCase.
PortworxVolumeSource
lightkube.models.core_v1.PortworxVolumeSource
(volumeID, fsType=None, readOnly=None)PortworxVolumeSource represents a Portworx volume resource.
parameters
- volumeID
str
- VolumeID uniquely identifies a Portworx volume - fsType
str
- (optional) FSType represents the filesystem type to mount Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified. - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.
PreferredSchedulingTerm
lightkube.models.core_v1.PreferredSchedulingTerm
(preference, weight)An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).
parameters
- preference
NodeSelectorTerm
- A node selector term, associated with the corresponding weight. - weight
int
- Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.
Probe
lightkube.models.core_v1.Probe
(exec=None, failureThreshold=None, grpc=None, httpGet=None, initialDelaySeconds=None, periodSeconds=None, successThreshold=None, tcpSocket=None, terminationGracePeriodSeconds=None, timeoutSeconds=None)Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.
parameters
- exec
ExecAction
- (optional) Exec specifies the action to take. - failureThreshold
int
- (optional) Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1. - grpc
GRPCAction
- (optional) GRPC specifies an action involving a GRPC port. This is an alpha field and requires enabling GRPCContainerProbe feature gate. - httpGet
HTTPGetAction
- (optional) HTTPGet specifies the http request to perform. - initialDelaySeconds
int
- (optional) Number of seconds after the container has started before liveness probes are initiated. More info - periodSeconds
int
- (optional) How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1. - successThreshold
int
- (optional) Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - tcpSocket
TCPSocketAction
- (optional) TCPSocket specifies an action involving a TCP port. - terminationGracePeriodSeconds
int
- (optional) Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - timeoutSeconds
int
- (optional) Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info
ProjectedVolumeSource
lightkube.models.core_v1.ProjectedVolumeSource
(defaultMode=None, sources=None)Represents a projected volume source
parameters
- defaultMode
int
- (optional) Mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. - sources
VolumeProjection
- (optional) list of volume projections
QuobyteVolumeSource
lightkube.models.core_v1.QuobyteVolumeSource
(registry, volume, group=None, readOnly=None, tenant=None, user=None)Represents a Quobyte mount that lasts the lifetime of a pod. Quobyte volumes do not support ownership management or SELinux relabeling.
parameters
- registry
str
- Registry represents a single or multiple Quobyte Registry services specified as a string as host:port pair (multiple entries are separated with commas) which acts as the central registry for volumes - volume
str
- Volume is a string that references an already created Quobyte volume by name. - group
str
- (optional) Group to map volume access to Default is no group - readOnly
bool
- (optional) ReadOnly here will force the Quobyte volume to be mounted with read-only permissions. Defaults to false. - tenant
str
- (optional) Tenant owning the given Quobyte volume in the Backend Used with dynamically provisioned Quobyte volumes, value is set by the plugin - user
str
- (optional) User to map volume access to Defaults to serivceaccount user
RBDPersistentVolumeSource
lightkube.models.core_v1.RBDPersistentVolumeSource
(image, monitors, fsType=None, keyring=None, pool=None, readOnly=None, secretRef=None, user=None)Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.
parameters
- image
str
- The rados image name. More info - monitors
List[str]
- A collection of Ceph monitors. More info - fsType
str
- (optional) Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - keyring
str
- (optional) Keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info - pool
str
- (optional) The rados pool name. Default is rbd. More info - readOnly
bool
- (optional) ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info - secretRef
SecretReference
- (optional) SecretRef is name of the authentication secret for RBDUser. If provided overrides keyring. Default is nil. More info - user
str
- (optional) The rados user name. Default is admin. More info
RBDVolumeSource
lightkube.models.core_v1.RBDVolumeSource
(image, monitors, fsType=None, keyring=None, pool=None, readOnly=None, secretRef=None, user=None)Represents a Rados Block Device mount that lasts the lifetime of a pod. RBD volumes support ownership management and SELinux relabeling.
parameters
- image
str
- The rados image name. More info - monitors
List[str]
- A collection of Ceph monitors. More info - fsType
str
- (optional) Filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. More info - keyring
str
- (optional) Keyring is the path to key ring for RBDUser. Default is /etc/ceph/keyring. More info - pool
str
- (optional) The rados pool name. Default is rbd. More info - readOnly
bool
- (optional) ReadOnly here will force the ReadOnly setting in VolumeMounts. Defaults to false. More info - secretRef
LocalObjectReference
- (optional) SecretRef is name of the authentication secret for RBDUser. If provided overrides keyring. Default is nil. More info - user
str
- (optional) The rados user name. Default is admin. More info
ReplicationController
lightkube.models.core_v1.ReplicationController
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)ReplicationController represents the configuration of a replication controller.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) If the Labels of a ReplicationController are empty, they are defaulted to be the same as the Pod(s) that the replication controller manages. Standard object's metadata. More info - spec
ReplicationControllerSpec
- (optional) Spec defines the specification of the desired behavior of the replication controller. More info - status
ReplicationControllerStatus
- (optional) Status is the most recently observed status of the replication controller. This data may be out of date by some window of time. Populated by the system. Read-only. More info
ReplicationControllerCondition
lightkube.models.core_v1.ReplicationControllerCondition
(status, type, lastTransitionTime=None, message=None, reason=None)ReplicationControllerCondition describes the state of a replication controller at a certain point.
parameters
- status
str
- Status of the condition, one of True, False, Unknown. - type
str
- Type of replication controller condition. - lastTransitionTime
meta_v1.Time
- (optional) The last time the condition transitioned from one status to another. - message
str
- (optional) A human readable message indicating details about the transition. - reason
str
- (optional) The reason for the condition's last transition.
ReplicationControllerList
lightkube.models.core_v1.ReplicationControllerList
(items, apiVersion=None, kind=None, metadata=None)ReplicationControllerList is a collection of replication controllers.
parameters
- items
ReplicationController
- List of replication controllers. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
ReplicationControllerSpec
lightkube.models.core_v1.ReplicationControllerSpec
(minReadySeconds=None, replicas=None, selector=None, template=None)ReplicationControllerSpec is the specification of a replication controller.
parameters
- minReadySeconds
int
- (optional) Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready) - replicas
int
- (optional) Replicas is the number of desired replicas. This is a pointer to distinguish between explicit zero and unspecified. Defaults to 1. More info - selector
dict
- (optional) Selector is a label query over pods that should match the Replicas count. If Selector is empty, it is defaulted to the labels present on the Pod template. Label keys and values that must match in order to be controlled by this replication controller, if empty defaulted to labels on Pod template. More info - template
PodTemplateSpec
- (optional) Template is the object that describes the pod that will be created if insufficient replicas are detected. This takes precedence over a TemplateRef. More info
ReplicationControllerStatus
lightkube.models.core_v1.ReplicationControllerStatus
(replicas, availableReplicas=None, conditions=None, fullyLabeledReplicas=None, observedGeneration=None, readyReplicas=None)ReplicationControllerStatus represents the current status of a replication controller.
parameters
- replicas
int
- Replicas is the most recently oberved number of replicas. More info - availableReplicas
int
- (optional) The number of available replicas (ready for at least minReadySeconds) for this replication controller. - conditions
ReplicationControllerCondition
- (optional) Represents the latest available observations of a replication controller's current state. - fullyLabeledReplicas
int
- (optional) The number of pods that have labels matching the labels of the pod template of the replication controller. - observedGeneration
int
- (optional) ObservedGeneration reflects the generation of the most recently observed replication controller. - readyReplicas
int
- (optional) The number of ready replicas for this replication controller.
ResourceFieldSelector
lightkube.models.core_v1.ResourceFieldSelector
(resource, containerName=None, divisor=None)ResourceFieldSelector represents container resources (cpu, memory) and their output format
parameters
- resource
str
- Required: resource to select - containerName
str
- (optional) Container name: required for volumes, optional for env vars - divisor
resource.Quantity
- (optional) Specifies the output format of the exposed resources, defaults to "1"
ResourceQuota
lightkube.models.core_v1.ResourceQuota
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)ResourceQuota sets aggregate quota restrictions enforced per namespace
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
ResourceQuotaSpec
- (optional) Spec defines the desired quota. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status - status
ResourceQuotaStatus
- (optional) Status defines the actual enforced quota and its current usage. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
ResourceQuotaList
lightkube.models.core_v1.ResourceQuotaList
(items, apiVersion=None, kind=None, metadata=None)ResourceQuotaList is a list of ResourceQuota items.
parameters
- items
ResourceQuota
- Items is a list of ResourceQuota objects. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
ResourceQuotaSpec
lightkube.models.core_v1.ResourceQuotaSpec
(hard=None, scopeSelector=None, scopes=None)ResourceQuotaSpec defines the desired hard limits to enforce for Quota.
parameters
- hard
dict
- (optional) hard is the set of desired hard limits for each named resource. More info - scopeSelector
ScopeSelector
- (optional) scopeSelector is also a collection of filters like scopes that must match each object tracked by a quota but expressed using ScopeSelectorOperator in combination with possible values. For a resource to match, both scopes AND scopeSelector (if specified in spec), must be matched. - scopes
List[str]
- (optional) A collection of filters that must match each object tracked by a quota. If not specified, the quota matches all objects.
ResourceQuotaStatus
lightkube.models.core_v1.ResourceQuotaStatus
(hard=None, used=None)ResourceQuotaStatus defines the enforced hard limits and observed use.
parameters
- hard
dict
- (optional) Hard is the set of enforced hard limits for each named resource. More info - used
dict
- (optional) Used is the current observed total usage of the resource in the namespace.
ResourceRequirements
lightkube.models.core_v1.ResourceRequirements
(limits=None, requests=None)ResourceRequirements describes the compute resource requirements.
parameters
- limits
dict
- (optional) Limits describes the maximum amount of compute resources allowed. More info - requests
dict
- (optional) Requests describes the minimum amount of compute resources required. If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, otherwise to an implementation-defined value. More info
SELinuxOptions
lightkube.models.core_v1.SELinuxOptions
(level=None, role=None, type=None, user=None)SELinuxOptions are the labels to be applied to the container
parameters
- level
str
- (optional) Level is SELinux level label that applies to the container. - role
str
- (optional) Role is a SELinux role label that applies to the container. - type
str
- (optional) Type is a SELinux type label that applies to the container. - user
str
- (optional) User is a SELinux user label that applies to the container.
ScaleIOPersistentVolumeSource
lightkube.models.core_v1.ScaleIOPersistentVolumeSource
(gateway, secretRef, system, fsType=None, protectionDomain=None, readOnly=None, sslEnabled=None, storageMode=None, storagePool=None, volumeName=None)ScaleIOPersistentVolumeSource represents a persistent ScaleIO volume
parameters
- gateway
str
- The host address of the ScaleIO API Gateway. - secretRef
SecretReference
- SecretRef references to the secret for ScaleIO user and other sensitive information. If this is not provided, Login operation will fail. - system
str
- The name of the storage system as configured in ScaleIO. - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs" - protectionDomain
str
- (optional) The name of the ScaleIO Protection Domain for the configured storage. - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - sslEnabled
bool
- (optional) Flag to enable/disable SSL communication with Gateway, default false - storageMode
str
- (optional) Indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned. - storagePool
str
- (optional) The ScaleIO Storage Pool associated with the protection domain. - volumeName
str
- (optional) The name of a volume already created in the ScaleIO system that is associated with this volume source.
ScaleIOVolumeSource
lightkube.models.core_v1.ScaleIOVolumeSource
(gateway, secretRef, system, fsType=None, protectionDomain=None, readOnly=None, sslEnabled=None, storageMode=None, storagePool=None, volumeName=None)ScaleIOVolumeSource represents a persistent ScaleIO volume
parameters
- gateway
str
- The host address of the ScaleIO API Gateway. - secretRef
LocalObjectReference
- SecretRef references to the secret for ScaleIO user and other sensitive information. If this is not provided, Login operation will fail. - system
str
- The name of the storage system as configured in ScaleIO. - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Default is "xfs". - protectionDomain
str
- (optional) The name of the ScaleIO Protection Domain for the configured storage. - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - sslEnabled
bool
- (optional) Flag to enable/disable SSL communication with Gateway, default false - storageMode
str
- (optional) Indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. Default is ThinProvisioned. - storagePool
str
- (optional) The ScaleIO Storage Pool associated with the protection domain. - volumeName
str
- (optional) The name of a volume already created in the ScaleIO system that is associated with this volume source.
ScopeSelector
lightkube.models.core_v1.ScopeSelector
(matchExpressions=None)A scope selector represents the AND of the selectors represented by the scoped-resource selector requirements.
parameters
- matchExpressions
ScopedResourceSelectorRequirement
- (optional) A list of scope selector requirements by scope of the resources.
ScopedResourceSelectorRequirement
lightkube.models.core_v1.ScopedResourceSelectorRequirement
(operator, scopeName, values=None)A scoped-resource selector requirement is a selector that contains values, a scope name, and an operator that relates the scope name and values.
parameters
- operator
str
- Represents a scope's relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. - scopeName
str
- The name of the scope that the selector applies to. - values
List[str]
- (optional) An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.
SeccompProfile
lightkube.models.core_v1.SeccompProfile
(type, localhostProfile=None)SeccompProfile defines a pod/container's seccomp profile settings. Only one profile source may be set.
parameters
- type
str
- type indicates which kind of seccomp profile will be applied. Valid options are: Localhost - a profile defined in a file on the node should be used. RuntimeDefault - the container runtime default profile should be used. Unconfined - no profile should be applied. - localhostProfile
str
- (optional) localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet's configured seccomp profile location. Must only be set if type is "Localhost".
Secret
lightkube.models.core_v1.Secret
(apiVersion=None, data=None, immutable=None, kind=None, metadata=None, stringData=None, type=None)Secret holds secret data of a certain type. The total bytes of the values in the Data field must be less than MaxSecretSize bytes.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - data
dict
- (optional) Data contains the secret data. Each key must consist of alphanumeric characters, '-', '_' or '.'. The serialized form of the secret data is a base64 encoded string, representing the arbitrary (possibly non-string) data value here. Described in https://tools.ietf.org/html/rfc4648#section-4 - immutable
bool
- (optional) Immutable, if set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified). If not set to true, the field can be modified at any time. Defaulted to nil. - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - stringData
dict
- (optional) stringData allows specifying non-binary secret data in string form. It is provided as a write-only input field for convenience. All keys and values are merged into the data field on write, overwriting any existing values. The stringData field is never output when reading from the API. - type
str
- (optional) Used to facilitate programmatic handling of secret data. More info
SecretEnvSource
lightkube.models.core_v1.SecretEnvSource
(name=None, optional=None)SecretEnvSource selects a Secret to populate the environment variables with.
The contents of the target Secret's Data field will represent the key-value pairs as environment variables.
parameters
- name
str
- (optional) Name of the referent. More info - optional
bool
- (optional) Specify whether the Secret must be defined
SecretKeySelector
lightkube.models.core_v1.SecretKeySelector
(key, name=None, optional=None)SecretKeySelector selects a key of a Secret.
parameters
- key
str
- The key of the secret to select from. Must be a valid secret key. - name
str
- (optional) Name of the referent. More info - optional
bool
- (optional) Specify whether the Secret or its key must be defined
SecretList
lightkube.models.core_v1.SecretList
(items, apiVersion=None, kind=None, metadata=None)SecretList is a list of Secret.
parameters
- items
Secret
- Items is a list of secret objects. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
SecretProjection
lightkube.models.core_v1.SecretProjection
(items=None, name=None, optional=None)Adapts a secret into a projected volume.
The contents of the target Secret's Data field will be presented in a projected volume as files using the keys in the Data field as the file names. Note that this is identical to a secret volume source without the default mode.
parameters
- items
KeyToPath
- (optional) If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. - name
str
- (optional) Name of the referent. More info - optional
bool
- (optional) Specify whether the Secret or its key must be defined
SecretReference
lightkube.models.core_v1.SecretReference
(name=None, namespace=None)SecretReference represents a Secret Reference. It has enough information to retrieve secret in any namespace
parameters
- name
str
- (optional) Name is unique within a namespace to reference a secret resource. - namespace
str
- (optional) Namespace defines the space within which the secret name must be unique.
SecretVolumeSource
lightkube.models.core_v1.SecretVolumeSource
(defaultMode=None, items=None, optional=None, secretName=None)Adapts a Secret into a volume.
The contents of the target Secret's Data field will be presented in a volume as files using the keys in the Data field as the file names. Secret volumes support ownership management and SELinux relabeling.
parameters
- defaultMode
int
- (optional) Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set. - items
KeyToPath
- (optional) If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'. - optional
bool
- (optional) Specify whether the Secret or its keys must be defined - secretName
str
- (optional) Name of the secret in the pod's namespace to use. More info
SecurityContext
lightkube.models.core_v1.SecurityContext
(allowPrivilegeEscalation=None, capabilities=None, privileged=None, procMount=None, readOnlyRootFilesystem=None, runAsGroup=None, runAsNonRoot=None, runAsUser=None, seLinuxOptions=None, seccompProfile=None, windowsOptions=None)SecurityContext holds security configuration that will be applied to a container. Some fields are present in both SecurityContext and PodSecurityContext. When both are set, the values in SecurityContext take precedence.
parameters
- allowPrivilegeEscalation
bool
- (optional) AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows. - capabilities
Capabilities
- (optional) The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows. - privileged
bool
- (optional) Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows. - procMount
str
- (optional) procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths. This requires the ProcMountType feature flag to be enabled. Note that this field cannot be set when spec.os.name is windows. - readOnlyRootFilesystem
bool
- (optional) Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows. - runAsGroup
int
- (optional) The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. - runAsNonRoot
bool
- (optional) Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - runAsUser
int
- (optional) The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. - seLinuxOptions
SELinuxOptions
- (optional) The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows. - seccompProfile
SeccompProfile
- (optional) The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options. Note that this field cannot be set when spec.os.name is windows. - windowsOptions
WindowsSecurityContextOptions
- (optional) The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is linux.
Service
lightkube.models.core_v1.Service
(apiVersion=None, kind=None, metadata=None, spec=None, status=None)Service is a named abstraction of software service (for example, mysql) consisting of local port (for example 3306) that the proxy listens on, and the selector that determines which pods will answer requests sent through the proxy.
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - spec
ServiceSpec
- (optional) Spec defines the behavior of a service. https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status - status
ServiceStatus
- (optional) Most recently observed status of the service. Populated by the system. Read-only. More info
ServiceAccount
lightkube.models.core_v1.ServiceAccount
(apiVersion=None, automountServiceAccountToken=None, imagePullSecrets=None, kind=None, metadata=None, secrets=None)ServiceAccount binds together: * a name, understood by users, and perhaps by peripheral systems, for an identity * a principal that can be authenticated and authorized * a set of secrets
parameters
- apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - automountServiceAccountToken
bool
- (optional) AutomountServiceAccountToken indicates whether pods running as this service account should have an API token automatically mounted. Can be overridden at the pod level. - imagePullSecrets
LocalObjectReference
- (optional) ImagePullSecrets is a list of references to secrets in the same namespace to use for pulling any images in pods that reference this ServiceAccount. ImagePullSecrets are distinct from Secrets because Secrets can be mounted in the pod, but ImagePullSecrets are only accessed by the kubelet. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ObjectMeta
- (optional) Standard object's metadata. More info - secrets
ObjectReference
- (optional) Secrets is the list of secrets allowed to be used by pods running using this ServiceAccount. More info
ServiceAccountList
lightkube.models.core_v1.ServiceAccountList
(items, apiVersion=None, kind=None, metadata=None)ServiceAccountList is a list of ServiceAccount objects
parameters
- items
ServiceAccount
- List of ServiceAccounts. More info - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
ServiceAccountTokenProjection
lightkube.models.core_v1.ServiceAccountTokenProjection
(path, audience=None, expirationSeconds=None)ServiceAccountTokenProjection represents a projected service account token volume. This projection can be used to insert a service account token into the pods runtime filesystem for use against APIs (Kubernetes API Server or otherwise).
parameters
- path
str
- Path is the path relative to the mount point of the file to project the token into. - audience
str
- (optional) Audience is the intended audience of the token. A recipient of a token must identify itself with an identifier specified in the audience of the token, and otherwise should reject the token. The audience defaults to the identifier of the apiserver. - expirationSeconds
int
- (optional) ExpirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes.
ServiceList
lightkube.models.core_v1.ServiceList
(items, apiVersion=None, kind=None, metadata=None)ServiceList holds a list of services.
parameters
- items
Service
- List of services - apiVersion
str
- (optional) APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info - kind
str
- (optional) Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info - metadata
meta_v1.ListMeta
- (optional) Standard list metadata. More info
ServicePort
lightkube.models.core_v1.ServicePort
(port, appProtocol=None, name=None, nodePort=None, protocol=None, targetPort=None)ServicePort contains information on service's port.
parameters
- port
int
- The port that will be exposed by this service. - appProtocol
str
- (optional) The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol. - name
str
- (optional) The name of this port within the service. This must be a DNS_LABEL. All ports within a ServiceSpec must have unique names. When considering the endpoints for a Service, this must match the 'name' field in the EndpointPort. Optional if only one ServicePort is defined on this service. - nodePort
int
- (optional) The port on each node on which this service is exposed when type is NodePort or LoadBalancer. Usually assigned by the system. If a value is specified, in-range, and not in use it will be used, otherwise the operation will fail. If not specified, a port will be allocated if this Service requires one. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type from NodePort to ClusterIP). More info - protocol
str
- (optional) The IP protocol for this port. Supports "TCP", "UDP", and "SCTP". Default is TCP. - targetPort
util_intstr.IntOrString
- (optional) Number or name of the port to access on the pods targeted by the service. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. If this is a string, it will be looked up as a named port in the target Pod's container ports. If this is not specified, the value of the 'port' field is used (an identity map). This field is ignored for services with clusterIP=None, and should be omitted or set equal to the 'port' field. More info
ServiceSpec
lightkube.models.core_v1.ServiceSpec
(allocateLoadBalancerNodePorts=None, clusterIP=None, clusterIPs=None, externalIPs=None, externalName=None, externalTrafficPolicy=None, healthCheckNodePort=None, internalTrafficPolicy=None, ipFamilies=None, ipFamilyPolicy=None, loadBalancerClass=None, loadBalancerIP=None, loadBalancerSourceRanges=None, ports=None, publishNotReadyAddresses=None, selector=None, sessionAffinity=None, sessionAffinityConfig=None, type=None)ServiceSpec describes the attributes that a user creates on a service.
parameters
- allocateLoadBalancerNodePorts
bool
- (optional) allocateLoadBalancerNodePorts defines if NodePorts will be automatically allocated for services with type LoadBalancer. Default is "true". It may be set to "false" if the cluster load-balancer does not rely on NodePorts. If the caller requests specific NodePorts (by specifying a value), those requests will be respected, regardless of this field. This field may only be set for services with type LoadBalancer and will be cleared if the type is changed to any other type. This field is beta-level and is only honored by servers that enable the ServiceLBNodePortControl feature. - clusterIP
str
- (optional) clusterIP is the IP address of the service and is usually assigned randomly. If an address is specified manually, is in-range (as per system configuration), and is not in use, it will be allocated to the service; otherwise creation of the service will fail. This field may not be changed through updates unless the type field is also being changed to ExternalName (which requires this field to be blank) or the type field is being changed from ExternalName (in which case this field may optionally be specified, as describe above). Valid values are "None", empty string (""), or a valid IP address. Setting this to "None" makes a "headless service" (no virtual IP), which is useful when direct endpoint connections are preferred and proxying is not required. Only applies to types ClusterIP, NodePort, and LoadBalancer. If this field is specified when creating a Service of type ExternalName, creation will fail. This field will be wiped when updating a Service to type ExternalName. More info - clusterIPs
List[str]
- (optional) ClusterIPs is a list of IP addresses assigned to this service, and are usually assigned randomly. If an address is specified manually, is in-range (as per system configuration), and is not in use, it will be allocated to the service; otherwise creation of the service will fail. This field may not be changed through updates unless the type field is also being changed to ExternalName (which requires this field to be empty) or the type field is being changed from ExternalName (in which case this field may optionally be specified, as describe above). Valid values are "None", empty string (""), or a valid IP address. Setting this to "None" makes a "headless service" (no virtual IP), which is useful when direct endpoint connections are preferred and proxying is not required. Only applies to types ClusterIP, NodePort, and LoadBalancer. If this field is specified when creating a Service of type ExternalName, creation will fail. This field will be wiped when updating a Service to type ExternalName. If this field is not specified, it will be initialized from the clusterIP field. If this field is specified, clients must ensure that clusterIPs[0] and clusterIP have the same value. This field may hold a maximum of two entries (dual-stack IPs, in either order). These IPs must correspond to the values of the ipFamilies field. Both clusterIPs and ipFamilies are governed by the ipFamilyPolicy field. More info - externalIPs
List[str]
- (optional) externalIPs is a list of IP addresses for which nodes in the cluster will also accept traffic for this service. These IPs are not managed by Kubernetes. The user is responsible for ensuring that traffic arrives at a node with this IP. A common example is external load-balancers that are not part of the Kubernetes system. - externalName
str
- (optional) externalName is the external reference that discovery mechanisms will return as an alias for this service (e.g. a DNS CNAME record). No proxying will be involved. Must be a lowercase RFC-1123 hostname (https://tools.ietf.org/html/rfc1123) and requirestype
to be "ExternalName". - externalTrafficPolicy
str
- (optional) externalTrafficPolicy denotes if this Service desires to route external traffic to node-local or cluster-wide endpoints. "Local" preserves the client source IP and avoids a second hop for LoadBalancer and Nodeport type services, but risks potentially imbalanced traffic spreading. "Cluster" obscures the client source IP and may cause a second hop to another node, but should have good overall load-spreading. - healthCheckNodePort
int
- (optional) healthCheckNodePort specifies the healthcheck nodePort for the service. This only applies when type is set to LoadBalancer and externalTrafficPolicy is set to Local. If a value is specified, is in-range, and is not in use, it will be used. If not specified, a value will be automatically allocated. External systems (e.g. load-balancers) can use this port to determine if a given node holds endpoints for this service or not. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type). - internalTrafficPolicy
str
- (optional) InternalTrafficPolicy specifies if the cluster internal traffic should be routed to all endpoints or node-local endpoints only. "Cluster" routes internal traffic to a Service to all endpoints. "Local" routes traffic to node-local endpoints only, traffic is dropped if no node-local endpoints are ready. The default value is "Cluster". - ipFamilies
List[str]
- (optional) IPFamilies is a list of IP families (e.g. IPv4, IPv6) assigned to this service. This field is usually assigned automatically based on cluster configuration and the ipFamilyPolicy field. If this field is specified manually, the requested family is available in the cluster, and ipFamilyPolicy allows it, it will be used; otherwise creation of the service will fail. This field is conditionally mutable: it allows for adding or removing a secondary IP family, but it does not allow changing the primary IP family of the Service. Valid values are "IPv4" and "IPv6". This field only applies to Services of types ClusterIP, NodePort, and LoadBalancer, and does apply to "headless" services. This field will be wiped when updating a Service to type ExternalName. This field may hold a maximum of two entries (dual-stack families, in either order). These families must correspond to the values of the clusterIPs field, if specified. Both clusterIPs and ipFamilies are governed by the ipFamilyPolicy field. - ipFamilyPolicy
str
- (optional) IPFamilyPolicy represents the dual-stack-ness requested or required by this Service. If there is no value provided, then this field will be set to SingleStack. Services can be "SingleStack" (a single IP family), "PreferDualStack" (two IP families on dual-stack configured clusters or a single IP family on single-stack clusters), or "RequireDualStack" (two IP families on dual-stack configured clusters, otherwise fail). The ipFamilies and clusterIPs fields depend on the value of this field. This field will be wiped when updating a service to type ExternalName. - loadBalancerClass
str
- (optional) loadBalancerClass is the class of the load balancer implementation this Service belongs to. If specified, the value of this field must be a label-style identifier, with an optional prefix, e.g. "internal-vip" or "example.com/internal-vip". Unprefixed names are reserved for end-users. This field can only be set when the Service type is 'LoadBalancer'. If not set, the default load balancer implementation is used, today this is typically done through the cloud provider integration, but should apply for any default implementation. If set, it is assumed that a load balancer implementation is watching for Services with a matching class. Any default load balancer implementation (e.g. cloud providers) should ignore Services that set this field. This field can only be set when creating or updating a Service to type 'LoadBalancer'. Once set, it can not be changed. This field will be wiped when a service is updated to a non 'LoadBalancer' type. - loadBalancerIP
str
- (optional) Only applies to Service Type: LoadBalancer LoadBalancer will get created with the IP specified in this field. This feature depends on whether the underlying cloud-provider supports specifying the loadBalancerIP when a load balancer is created. This field will be ignored if the cloud-provider does not support the feature. - loadBalancerSourceRanges
List[str]
- (optional) If specified and supported by the platform, this will restrict traffic through the cloud-provider load-balancer will be restricted to the specified client IPs. This field will be ignored if the cloud-provider does not support the feature." More info - ports
ServicePort
- (optional) The list of ports that are exposed by this service. More info - publishNotReadyAddresses
bool
- (optional) publishNotReadyAddresses indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready. The primary use case for setting this field is for a StatefulSet's Headless Service to propagate SRV DNS records for its Pods for the purpose of peer discovery. The Kubernetes controllers that generate Endpoints and EndpointSlice resources for Services interpret this to mean that all endpoints are considered "ready" even if the Pods themselves are not. Agents which consume only Kubernetes generated endpoints through the Endpoints or EndpointSlice resources can safely assume this behavior. - selector
dict
- (optional) Route service traffic to pods with label keys and values matching this selector. If empty or not present, the service is assumed to have an external process managing its endpoints, which Kubernetes will not modify. Only applies to types ClusterIP, NodePort, and LoadBalancer. Ignored if type is ExternalName. More info - sessionAffinity
str
- (optional) Supports "ClientIP" and "None". Used to maintain session affinity. Enable client IP based session affinity. Must be ClientIP or None. Defaults to None. More info - sessionAffinityConfig
SessionAffinityConfig
- (optional) sessionAffinityConfig contains the configurations of session affinity. - type
str
- (optional) type determines how the Service is exposed. Defaults to ClusterIP. Valid options are ExternalName, ClusterIP, NodePort, and LoadBalancer. "ClusterIP" allocates a cluster-internal IP address for load-balancing to endpoints. Endpoints are determined by the selector or if that is not specified, by manual construction of an Endpoints object or EndpointSlice objects. If clusterIP is "None", no virtual IP is allocated and the endpoints are published as a set of endpoints rather than a virtual IP. "NodePort" builds on ClusterIP and allocates a port on every node which routes to the same endpoints as the clusterIP. "LoadBalancer" builds on NodePort and creates an external load-balancer (if supported in the current cloud) which routes to the same endpoints as the clusterIP. "ExternalName" aliases this service to the specified externalName. Several other fields do not apply to ExternalName services. More info
ServiceStatus
lightkube.models.core_v1.ServiceStatus
(conditions=None, loadBalancer=None)ServiceStatus represents the current status of a service.
parameters
- conditions
meta_v1.Condition
- (optional) Current service state - loadBalancer
LoadBalancerStatus
- (optional) LoadBalancer contains the current status of the load-balancer, if one is present.
SessionAffinityConfig
lightkube.models.core_v1.SessionAffinityConfig
(clientIP=None)SessionAffinityConfig represents the configurations of session affinity.
parameters
- clientIP
ClientIPConfig
- (optional) clientIP contains the configurations of Client IP based session affinity.
StorageOSPersistentVolumeSource
lightkube.models.core_v1.StorageOSPersistentVolumeSource
(fsType=None, readOnly=None, secretRef=None, volumeName=None, volumeNamespace=None)Represents a StorageOS persistent volume resource.
parameters
- fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - secretRef
ObjectReference
- (optional) SecretRef specifies the secret to use for obtaining the StorageOS API credentials. If not specified, default values will be attempted. - volumeName
str
- (optional) VolumeName is the human-readable name of the StorageOS volume. Volume names are only unique within a namespace. - volumeNamespace
str
- (optional) VolumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod's namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.
StorageOSVolumeSource
lightkube.models.core_v1.StorageOSVolumeSource
(fsType=None, readOnly=None, secretRef=None, volumeName=None, volumeNamespace=None)Represents a StorageOS persistent volume resource.
parameters
- fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - readOnly
bool
- (optional) Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. - secretRef
LocalObjectReference
- (optional) SecretRef specifies the secret to use for obtaining the StorageOS API credentials. If not specified, default values will be attempted. - volumeName
str
- (optional) VolumeName is the human-readable name of the StorageOS volume. Volume names are only unique within a namespace. - volumeNamespace
str
- (optional) VolumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod's namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.
Sysctl
lightkube.models.core_v1.Sysctl
(name, value)Sysctl defines a kernel parameter to be set
parameters
- name
str
- Name of a property to set - value
str
- Value of a property to set
TCPSocketAction
lightkube.models.core_v1.TCPSocketAction
(port, host=None)TCPSocketAction describes an action based on opening a socket
parameters
- port
util_intstr.IntOrString
- Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. - host
str
- (optional) Optional: Host name to connect to, defaults to the pod IP.
Taint
lightkube.models.core_v1.Taint
(effect, key, timeAdded=None, value=None)The node this Taint is attached to has the "effect" on any pod that does not tolerate the Taint.
parameters
- effect
str
- Required. The effect of the taint on pods that do not tolerate the taint. Valid effects are NoSchedule, PreferNoSchedule and NoExecute. - key
str
- Required. The taint key to be applied to a node. - timeAdded
meta_v1.Time
- (optional) TimeAdded represents the time at which the taint was added. It is only written for NoExecute taints. - value
str
- (optional) The taint value corresponding to the taint key.
Toleration
lightkube.models.core_v1.Toleration
(effect=None, key=None, operator=None, tolerationSeconds=None, value=None)The pod this Toleration is attached to tolerates any taint that matches the
triple
parameters
- effect
str
- (optional) Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute. - key
str
- (optional) Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys. - operator
str
- (optional) Operator represents a key's relationship to the value. Valid operators are Exists and Equal. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category. - tolerationSeconds
int
- (optional) TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system. - value
str
- (optional) Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.
TopologySelectorLabelRequirement
lightkube.models.core_v1.TopologySelectorLabelRequirement
(key, values)A topology selector requirement is a selector that matches given label. This is an alpha feature and may change in the future.
parameters
- key
str
- The label key that the selector applies to. - values
List[str]
- An array of string values. One value must match the label to be selected. Each entry in Values is ORed.
TopologySelectorTerm
lightkube.models.core_v1.TopologySelectorTerm
(matchLabelExpressions=None)A topology selector term represents the result of label queries. A null or empty topology selector term matches no objects. The requirements of them are ANDed. It provides a subset of functionality as NodeSelectorTerm. This is an alpha feature and may change in the future.
parameters
- matchLabelExpressions
TopologySelectorLabelRequirement
- (optional) A list of topology selector requirements by labels.
TopologySpreadConstraint
lightkube.models.core_v1.TopologySpreadConstraint
(maxSkew, topologyKey, whenUnsatisfiable, labelSelector=None)TopologySpreadConstraint specifies how to spread matching pods among the given topology.
parameters
- maxSkew
int
- MaxSkew describes the degree to which pods may be unevenly distributed. WhenwhenUnsatisfiable=DoNotSchedule
, it is the maximum permitted difference between the number of matching pods in the target topology and the global minimum. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 1/1/0: | zone1 | zone2 | zone3 | | P | P | | - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 1/1/1; scheduling it onto zone1(zone2) would make the ActualSkew(2-0) on zone1(zone2) violate MaxSkew(1). - if MaxSkew is 2, incoming pod can be scheduled onto any zone. WhenwhenUnsatisfiable=ScheduleAnyway
, it is used to give higher precedence to topologies that satisfy it. It's a required field. Default value is 1 and 0 is not allowed. - topologyKey
str
- TopologyKey is the key of node labels. Nodes that have a label with this key and identical values are considered to be in the same topology. We consider eachas a "bucket", and try to put balanced number of pods into each bucket. It's a required field. - whenUnsatisfiable
str
- WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy the spread constraint. - DoNotSchedule (default) tells the scheduler not to schedule it. - ScheduleAnyway tells the scheduler to schedule the pod in any location, but giving higher precedence to topologies that would help reduce the skew. A constraint is considered "Unsatisfiable" for an incoming pod if and only if every possible node assignment for that pod would violate "MaxSkew" on some topology. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 3/1/1: | zone1 | zone2 | zone3 | | P P P | P | P | If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler won't make it more imbalanced. It's a required field. - labelSelector
meta_v1.LabelSelector
- (optional) LabelSelector is used to find matching pods. Pods that match this label selector are counted to determine the number of pods in their corresponding topology domain.
TypedLocalObjectReference
lightkube.models.core_v1.TypedLocalObjectReference
(kind, name, apiGroup=None)TypedLocalObjectReference contains enough information to let you locate the typed referenced object inside the same namespace.
parameters
- kind
str
- Kind is the type of resource being referenced - name
str
- Name is the name of resource being referenced - apiGroup
str
- (optional) APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
Volume
lightkube.models.core_v1.Volume
(name, awsElasticBlockStore=None, azureDisk=None, azureFile=None, cephfs=None, cinder=None, configMap=None, csi=None, downwardAPI=None, emptyDir=None, ephemeral=None, fc=None, flexVolume=None, flocker=None, gcePersistentDisk=None, gitRepo=None, glusterfs=None, hostPath=None, iscsi=None, nfs=None, persistentVolumeClaim=None, photonPersistentDisk=None, portworxVolume=None, projected=None, quobyte=None, rbd=None, scaleIO=None, secret=None, storageos=None, vsphereVolume=None)Volume represents a named volume in a pod that may be accessed by any container in the pod.
parameters
- name
str
- Volume's name. Must be a DNS_LABEL and unique within the pod. More info - awsElasticBlockStore
AWSElasticBlockStoreVolumeSource
- (optional) AWSElasticBlockStore represents an AWS Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info - azureDisk
AzureDiskVolumeSource
- (optional) AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod. - azureFile
AzureFileVolumeSource
- (optional) AzureFile represents an Azure File Service mount on the host and bind mount to the pod. - cephfs
CephFSVolumeSource
- (optional) CephFS represents a Ceph FS mount on the host that shares a pod's lifetime - cinder
CinderVolumeSource
- (optional) Cinder represents a cinder volume attached and mounted on kubelets host machine. More info - configMap
ConfigMapVolumeSource
- (optional) ConfigMap represents a configMap that should populate this volume - csi
CSIVolumeSource
- (optional) CSI (Container Storage Interface) represents ephemeral storage that is handled by certain external CSI drivers (Beta feature). - downwardAPI
DownwardAPIVolumeSource
- (optional) DownwardAPI represents downward API about the pod that should populate this volume - emptyDir
EmptyDirVolumeSource
- (optional) EmptyDir represents a temporary directory that shares a pod's lifetime. More info - ephemeral
EphemeralVolumeSource
- (optional) Ephemeral represents a volume that is handled by a cluster storage driver. The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, and deleted when the pod is removed. Use this if: a) the volume is only needed while the pod runs, b) features of normal volumes like restoring from snapshot or capacity tracking are needed, c) the storage driver is specified through a storage class, and d) the storage driver supports dynamic volume provisioning through a PersistentVolumeClaim (see EphemeralVolumeSource for more information on the connection between this volume type and PersistentVolumeClaim). Use PersistentVolumeClaim or one of the vendor-specific APIs for volumes that persist for longer than the lifecycle of an individual pod. Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to be used that way - see the documentation of the driver for more information. A pod can use both types of ephemeral volumes and persistent volumes at the same time. - fc
FCVolumeSource
- (optional) FC represents a Fibre Channel resource that is attached to a kubelet's host machine and then exposed to the pod. - flexVolume
FlexVolumeSource
- (optional) FlexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin. - flocker
FlockerVolumeSource
- (optional) Flocker represents a Flocker volume attached to a kubelet's host machine. This depends on the Flocker control service being running - gcePersistentDisk
GCEPersistentDiskVolumeSource
- (optional) GCEPersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info - gitRepo
GitRepoVolumeSource
- (optional) GitRepo represents a git repository at a particular revision. DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod's container. - glusterfs
GlusterfsVolumeSource
- (optional) Glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime. More info - hostPath
HostPathVolumeSource
- (optional) HostPath represents a pre-existing file or directory on the host machine that is directly exposed to the container. This is generally used for system agents or other privileged things that are allowed to see the host machine. Most containers will NOT need this. More info - iscsi
ISCSIVolumeSource
- (optional) ISCSI represents an ISCSI Disk resource that is attached to a kubelet's host machine and then exposed to the pod. More info - nfs
NFSVolumeSource
- (optional) NFS represents an NFS mount on the host that shares a pod's lifetime More info - persistentVolumeClaim
PersistentVolumeClaimVolumeSource
- (optional) PersistentVolumeClaimVolumeSource represents a reference to a PersistentVolumeClaim in the same namespace. More info - photonPersistentDisk
PhotonPersistentDiskVolumeSource
- (optional) PhotonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine - portworxVolume
PortworxVolumeSource
- (optional) PortworxVolume represents a portworx volume attached and mounted on kubelets host machine - projected
ProjectedVolumeSource
- (optional) Items for all in one resources secrets, configmaps, and downward API - quobyte
QuobyteVolumeSource
- (optional) Quobyte represents a Quobyte mount on the host that shares a pod's lifetime - rbd
RBDVolumeSource
- (optional) RBD represents a Rados Block Device mount on the host that shares a pod's lifetime. More info - scaleIO
ScaleIOVolumeSource
- (optional) ScaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes. - secret
SecretVolumeSource
- (optional) Secret represents a secret that should populate this volume. More info - storageos
StorageOSVolumeSource
- (optional) StorageOS represents a StorageOS volume attached and mounted on Kubernetes nodes. - vsphereVolume
VsphereVirtualDiskVolumeSource
- (optional) VsphereVolume represents a vSphere volume attached and mounted on kubelets host machine
VolumeDevice
lightkube.models.core_v1.VolumeDevice
(devicePath, name)volumeDevice describes a mapping of a raw block device within a container.
parameters
- devicePath
str
- devicePath is the path inside of the container that the device will be mapped to. - name
str
- name must match the name of a persistentVolumeClaim in the pod
VolumeMount
lightkube.models.core_v1.VolumeMount
(mountPath, name, mountPropagation=None, readOnly=None, subPath=None, subPathExpr=None)VolumeMount describes a mounting of a Volume within a container.
parameters
- mountPath
str
- Path within the container at which the volume should be mounted. Must not contain ':'. - name
str
- This must match the Name of a Volume. - mountPropagation
str
- (optional) mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10. - readOnly
bool
- (optional) Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false. - subPath
str
- (optional) Path within the volume from which the container's volume should be mounted. Defaults to "" (volume's root). - subPathExpr
str
- (optional) Expanded path within the volume from which the container's volume should be mounted. Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. Defaults to "" (volume's root). SubPathExpr and SubPath are mutually exclusive.
VolumeNodeAffinity
lightkube.models.core_v1.VolumeNodeAffinity
(required=None)VolumeNodeAffinity defines constraints that limit what nodes this volume can be accessed from.
parameters
- required
NodeSelector
- (optional) Required specifies hard node constraints that must be met.
VolumeProjection
lightkube.models.core_v1.VolumeProjection
(configMap=None, downwardAPI=None, secret=None, serviceAccountToken=None)Projection that may be projected along with other supported volume types
parameters
- configMap
ConfigMapProjection
- (optional) information about the configMap data to project - downwardAPI
DownwardAPIProjection
- (optional) information about the downwardAPI data to project - secret
SecretProjection
- (optional) information about the secret data to project - serviceAccountToken
ServiceAccountTokenProjection
- (optional) information about the serviceAccountToken data to project
VsphereVirtualDiskVolumeSource
lightkube.models.core_v1.VsphereVirtualDiskVolumeSource
(volumePath, fsType=None, storagePolicyID=None, storagePolicyName=None)Represents a vSphere volume resource.
parameters
- volumePath
str
- Path that identifies vSphere volume vmdk - fsType
str
- (optional) Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - storagePolicyID
str
- (optional) Storage Policy Based Management (SPBM) profile ID associated with the StoragePolicyName. - storagePolicyName
str
- (optional) Storage Policy Based Management (SPBM) profile name.
WeightedPodAffinityTerm
lightkube.models.core_v1.WeightedPodAffinityTerm
(podAffinityTerm, weight)The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)
parameters
- podAffinityTerm
PodAffinityTerm
- Required. A pod affinity term, associated with the corresponding weight. - weight
int
- weight associated with matching the corresponding podAffinityTerm, in the range 1-100.
WindowsSecurityContextOptions
lightkube.models.core_v1.WindowsSecurityContextOptions
(gmsaCredentialSpec=None, gmsaCredentialSpecName=None, hostProcess=None, runAsUserName=None)WindowsSecurityContextOptions contain Windows-specific options and credentials.
parameters
- gmsaCredentialSpec
str
- (optional) GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field. - gmsaCredentialSpecName
str
- (optional) GMSACredentialSpecName is the name of the GMSA credential spec to use. - hostProcess
bool
- (optional) HostProcess determines if a container should be run as a 'Host Process' container. This field is alpha-level and will only be honored by components that enable the WindowsHostProcessContainers feature flag. Setting this field without the feature flag will result in errors when validating the Pod. All of a Pod's containers must have the same effective HostProcess value (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). In addition, if HostProcess is true then HostNetwork must also be set to true. - runAsUserName
str
- (optional) The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.